Cutting + Grinding

Aluminium oxide fibre disc – the grain enables superior stock removal performance on steel. Good stock removal performance Long lifetime Few sparks Quality reference:    Grain Material suitability:   m/s Machine suitability:  

Self-fastening disc suitable for dry sanding of paints, varnishes and fillers. Paper backing Open coated, with special stearate coating Ideal for dry sanding of body filler or paint removal Shape:    Thickness:   Paints/fillers   Non-ferrous metals Machine suitability:  

Abrasive paper with a paper backing and semi-open aluminium oxide coating. Particularly suitable for paints and varnishes Half-open coating for non-aggressive grinding Good for wood finishing Shape:    Thickness:   Non-ferrous metals   Paints/fillers Machine suitability:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Zircon fibre disc – the grain enables excellent stock removal performance on steel and stainless steel. Excellent stock removal performance Long lifetime Quality reference:    Grain Material suitability:   Steel Working speed 1:   Freehand angle grinder Machine suitability This fibre disc must be used together with a matching backing pad, such as the RHODIUS RH TURBO or the RHODIUS RH ST. Also ensure that the backing pad used has the right diameter. Material suitability Featuring high-quality zirconium, the RHODIUS KFZ fibre disc was specifically developed for processing stainless steel (e.g. V2A, 1.4301) and steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037). Quality The KFZ provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The disc contains no iron or sulphur. Dimension This fibre disc is available in the diameters of 115 mm to 180 mm and, depending on the individual variant, grits in the FEPA grit sizes of 24, 36, 40, 60 and 80.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Self fastening disc without hole system. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder   Machine suitability The RHODIUS KERR V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the RHODIUS KERR V. Structure and manufacture This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is closed-coated and bonded with a synthetic resin. An E-weight paper is used as the backing type here. Quality The KERR V self fastening disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Application This tool is an ideal choice for jobs involving cleaning and de-rusting work. This is where it makes the most of its strengths: powerful stock removal and a long tool life. Dimension This self-adhesive, self fastening disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries The KERR V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Self-fastening disc suitable for removing rust and paints. An ideal product for stock removal and burr removing – welding preparation, defect correction, structuring and finishing. Heavy F-paper backing with No-Tear technology Closed coated with synthetic resin bond for stability Fast, robust stock removal with long lifetime Shape:    Thickness:   Stainless steel   Wood   Rotary sander Adhesion:  

Self fastening disc without hole system. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder   Machine suitability The RHODIUS KERR V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the RHODIUS KERR V. Structure and manufacture This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is closed-coated and bonded with a synthetic resin. An E-weight paper is used as the backing type here. Quality The KERR V self fastening disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Application This tool is an ideal choice for jobs involving cleaning and de-rusting work. This is where it makes the most of its strengths: powerful stock removal and a long tool life. Dimension This self-adhesive, self fastening disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries The KERR V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Self fastening disc with 15-hole design for processing of paints, lacquer and fillers. Paper backing Open coated, with special stearate coating Optimal when combined with RH15 V Quality reference:    Grain Material suitability:   Wood   Rotary sander Adhesion:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Waterproof abrasive paper with silicon carbide on a paper backing. Closed coated silicon carbide for high material abrasion Fine grinding grit 2000 Flexible paper underlay for optimal workpiece adaptation Shape:    Thickness:   Stainless steel   Paints/fillers    Machine suitability This product is sold as pre-cut sheets of abrasive paper for use in manual grinding work. Material suitability This high-quality RHODIUS abrasive paper has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the WSP abrasive paper when working on paint and filler. Structure and manufacture The backing type used here is a special waterproof A/C-weight paper. The abrasive paper is coated with silicon carbide (SiC). The grain features an exceptionally closed coating. A long lifetime is ensured by the synthetic resin bonding. Quality The WSP gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The flexible paper backing lets the product adapt optimally to round surfaces. Dimension The WSP abrasive paper is available in the size 230 mm x 280 mm. To ensure an optimum working result and surface finish at all times, the user can select from many grits, ranging from 60 to 2000. Industries RHODIUS abrasive papers are perfectly suited to tackling the many applications and challenges faced in the machine and metalwork shop, in plant construction, plumbing, interior fit-out and renovation, as well as installation work. Not just for the pros: The WSP also provides home improvers and DIYers with a high-quality tool that ensures they can achieve superior cleaning results.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Tear-resistant self fastening disc with 15-hole design for processing of paints, lacquer and fillers. Open coated, special stearate coating avoids clogging (from 180 grit) Ideal for use together with the RH15 V backing pad Highly tear-resistant plastic foil for long lifetime Shape:    Thickness:   Stainless steel   Non-ferrous metals   GFRP Machine suitability:   Machine suitability The RHODIUS KSF15 V self fastening disc is designed for use with a rotary sander (shape CK 861). This creates a very high-performance tool when used with the RHODIUS RH15 V backing pad (available in 3 separate variants). Material suitability The product has been designed especially for processing GFRP, paint and filler, as well as stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, and also aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KSF15 V on any of the materials mentioned here. Structure and manufacture This disc is made from an abrasive foil and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is open-coated and bonded with a synthetic resin. A tear-resistant plastic foil is used as the backing type here. This ensures a long tool lifetime. The stearate coating (used from grit 180) also prevents the disc from clogging and smearing. Quality The KSF15 V self fastening disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This tool is an excellent choice for jobs involving the removal of paint, varnish and filler. The 15-hole multi-perforation ensures that sanding dust is removed constantly while working. This feature improves abrasive performance while extending the tool life of a single self fastening disc. The self fastening disc also shows its strengths to the full on rustproof or acid-proofed steels, Hardox and high-strength sheet metal. Dimension This self-adhesive self fastening disc is available with a diameter of 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 80 to 2000. Industries The KSF15 V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, and installation work.

Self-fastening disc suitable for removing rust and paints. An ideal product for stock removal and burr removing – welding preparation, defect correction, structuring and finishing. Heavy F-paper backing with No-Tear technology Closed coated with synthetic resin bond for stability Fast, robust stock removal with long lifetime Shape:    Thickness:   Stainless steel   Wood   Rotary sander Adhesion:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Self fastening disc without hole system. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder   Machine suitability The RHODIUS KERR V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the RHODIUS KERR V. Structure and manufacture This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is closed-coated and bonded with a synthetic resin. An E-weight paper is used as the backing type here. Quality The KERR V self fastening disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Application This tool is an ideal choice for jobs involving cleaning and de-rusting work. This is where it makes the most of its strengths: powerful stock removal and a long tool life. Dimension This self-adhesive, self fastening disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries The KERR V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.

Aluminium oxide fibre disc for the quick change system – the grain enables excellent stock removal performance on steel. Good stock removal Long lifetime Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Non-ferrous metals Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS KFS QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability The product has been designed especially for processing steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFS QUICK on any of the materials listed here. Structure and manufacture Developed for the quick change system, this fibre disc uses aluminium oxide as an abrasive grain and achieves good stock removal performance while simultaneously offering a long product lifetime. The backing type used here is a polyester-based X-weight cloth. Quality The RHODIUS KFS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for high-precision grinding work on steel, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The KFS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from various grits, ranging from 24 to 120. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools makes work easier by offering first-class performance on steel and non-ferrous metals.

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

The industry-standard metal cutting disc for the cost-conscious professional. Cuts easily with a good service life. High cutting speed Easy cutting Comfortable cutting behaviour Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

Zirconium fibre disc for the quick change system – the grain enables excellent stock removal performance on steel and stainless steel. Excellent stock removal Grinding active filler material for cool, rapid grinding Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Steel   Straight grinder  

A reliable cutting disc for the cost-conscious professional. Optimised for steel applications. Also ideal for low-power machines. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

The industry-standard metal cutting disc for the cost-conscious professional. Cuts easily with a good service life. High cutting speed Easy cutting Comfortable cutting behaviour Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:  

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Abrasive paper with especially flexible cloth backing. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Shape:    Thickness:   Stainless steel   Wood Machine suitability:  

Versatile cutting disc that offers a good price-performance ratio. High cutting speed Comfortable cutting behaviour Easy cutting Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

Abrasive non-woven sheets with fine, flexible fibres for a good surface finish. Flexible for optimum adjustment to the workpiece Uniform surface finish Quality reference:    Grain Material suitability:   Steel   GFRP Machine suitability:  

Versatile cutting disc that offers a good price-performance ratio. High cutting speed Comfortable cutting behaviour Easy cutting Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

At 0.8 mm, this cutting disc offers an exceptionally precise, clean and almost burr-free cut. Compatible with ASB XT mandrel. Optimal for cutting work at difficult to reach places Precise cut through 0.8 mm disc width Little bur formation Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Very innovative products with unique problem solving competence.  

Aluminium oxide fibre disc for the quick change system – the grain enables excellent stock removal performance on steel. Good stock removal Long lifetime Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Non-ferrous metals Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS KFS QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability The product has been designed especially for processing steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFS QUICK on any of the materials listed here. Structure and manufacture Developed for the quick change system, this fibre disc uses aluminium oxide as an abrasive grain and achieves good stock removal performance while simultaneously offering a long product lifetime. The backing type used here is a polyester-based X-weight cloth. Quality The RHODIUS KFS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for high-precision grinding work on steel, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The KFS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from various grits, ranging from 24 to 120. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools makes work easier by offering first-class performance on steel and non-ferrous metals.

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Steel hand scratch brush with straight steel wire inserts for high cleaning performance. Great cleaning performance To remove strong caking Shape:    Thickness:   Steel Machine suitability:  

Ceramic grain fibre disc for the quick change system – the grain enables rapid and superior stock removal performance. Especially suitable for hardened and tempered steels, tinder areas and titanium Perceivably faster stock removal Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Straight grinder    High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability A backing pad is required when using the RHODIUS KFK QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFK QUICK on any of the materials listed here. Structure and manufacture Developed for the quick change system, this fibre disc utilises self-sharpening high-performance ceramic abrasive grain that provides an impressive level of cleaning performance. The backing type used here is a polyester-based X-weight cloth. Quality With the RHODIUS KFK QUICK quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This tool is an excellent choice for high-precision grinding work, and especially where this involves very small spaces or hard-to-reach areas. This product is especially well-suited to processing quenched steel, tinder areas and titanium. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The KFK QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 36, 60, 80 and 120. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.

A reliable cutting disc for the cost-conscious professional. Iron and sulphur free. Long service life Comfortable cutting behaviour Easy cutting Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:  

Dependable freehand cutting disc with less edge chipping. Usable in many applications. High cutting speed Cool cut Easy cutting Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Non-ferrous metals Working speed 1:   Freehand angle grinder Machine suitability The FTK44 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability The FTK44 has been specially designed for concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium, aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Structure and manufacture The cutting disc includes premium SiC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality The FTK44 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application During use, the FTK44 offers an impressively aggressive cut, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. Dimension With a disc width of 2.0 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges faced in landscaping and installation work.

A reliable cutting disc for the cost-conscious professional. Iron and sulphur free. Long service life Comfortable cutting behaviour Easy cutting Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:  

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Machine suitability The XT70 X-LOCK cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XT70 X-LOCK has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines or with CERAMICON technology are recommended. Application The XT70 X-LOCK offers impressive performance during use with its especially light and fast cut. The disc features minimal sparking, stability during use and exceptional, vibration-free operation. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. This quality RHODIUS tool is an especially good choice for cutting structural steel, thin-walled metal sheets, rustproof and acid-proofed steels, cable ducts, supports and sections. Dimension The extra-thin X-LOCK cutting disc has a disc width of 1.0 mm or 1.5 mm, is available in the diameters of 115 mm and 125 mm, and is suitable for use on angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole. Industries This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Dependable freehand cutting disc with less edge chipping. Usable in many applications. High cutting speed Cool cut Easy cutting Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Non-ferrous metals Working speed 1:   Freehand angle grinder Machine suitability The FT44 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability The FT44 has been specially designed for concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium, aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Structure and manufacture The cutting disc includes premium SiC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality The FT44 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application During use, the FT44 offers an impressively aggressive cut, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. Dimension With a disc width of 2.5 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges faced in landscaping and installation work.

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Ceramic grain fibre disc – the grain enables superior stock removal performance in a short period of time with a very long lifetime. Especially suitable for hardened and tempered steels, tinder areas and titanium Perceivably faster stock removal Long lifetime Quality reference:    Grain Material suitability:   Steel Working speed 1:   Freehand angle grinder Technologies:  

Ultra high-performance freehand cutting disc for demanding user requirements. Long service life Easy cutting High cutting speed Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

Ultra high-performance freehand cutting disc for demanding user requirements. Long service life Easy cutting High cutting speed Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

Zirconium fibre disc for the quick change system – the grain enables excellent stock removal performance on steel and stainless steel. Excellent stock removal Grinding active filler material for cool, rapid grinding Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Wood Machine suitability:  

Steel wheel brush with crimped steel wire on a 6 mm shank, for use on drills. For flexible working For careful cleaning Brass-plated for improved corrosion protection Shape:    Thickness:   Steel Machine suitability:  

Versatile cutting disc that offers a good price-performance ratio. High cutting speed Comfortable cutting behaviour Easy cutting Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:    Machine suitability The FT33 X-LOCK cutting disc is suitable for freehand use on angle grinders. Material suitability The FT33 X-LOCK has been especially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality The FT33 X-LOCK gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application During use, the FT33 X-LOCK offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This RHODIUS quality tool is an especially good choice for cutting structural steel, tool steel, high-alloy steel, supports, sections, panels and beams. Dimension The X-LOCK freehand cutting disc has a disc width of 2.5 mm, is available in the diameters of 115 mm and 125 mm, and is suitable for use on angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole. Industries This makes it the perfect tool for the many jobs and challenges facing building fitters, as well as in plant and container construction, in foundries and fettling shops, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Steel wheel brush with crimped steel wire on a 6 mm shank, for use on drills. For flexible working For careful cleaning Brass-plated for improved corrosion protection Shape:    Thickness:   Steel Machine suitability:  

Non-woven tool for the quick change system. For fine grinding work. Uniform surface finish High proportion of grain binder for long lifetime Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Paints/fillers Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS VLS QUICK quick change mini non-woven disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the VLS QUICK when working on paint and filler. Structure and manufacture The non-woven disc for the quick change system is especially well-suited to fine grinding and pre-polishing work. The high proportion of grain binder used with this non-woven disc ensures a particularly long lifetime. Quality The RHODIUS VLS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for jobs that require a very even surface finish or pre-polishing finish. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The VLS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit variants: coarse/100, medium/180 and fine/280. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.