Cup brushes

Steel cup brush with crimped steel wire on a 6 mm shank, for use on drills. With high maximum permitted revolutions. For flexible working For careful cleaning Brass-plated for improved corrosion protection Shape:    Thickness:   Steel Machine suitability:  

Cup brush with abrasive grinding bristles for working on stainless steel, steel, wood and non-ferrous metals. Brush colour red: coarse Brush colour blue: fine Suitable for structuring wood Quality reference:    Grain Material suitability:   Steel   Wood Machine suitability:   Freehand angle grinder Machine suitability The HTB technical brush is designed for use with a handheld drill or an angle grinder that is equipped with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Structure and manufacture The fill material used for the HTB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality The HTB provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimension This cup brush is available in the diameters of 50 mm, 75 mm and 130 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Steel cup brush with crimped steel wire, for use on angle grinders. For flexible working For careful cleaning Brass-plated for improved corrosion protection Shape:    Thickness:   Steel Machine suitability:  

Steel cup brush with crimped steel wire, for use on angle grinders. For flexible working For careful cleaning Brass-plated for improved corrosion protection Shape:    Thickness:   Steel Machine suitability:  

Steel cup brush with knotted steel wire, for use on angle grinders. For great cleaning performance To remove strong caking Removable support ring for longer lifetime (from 75 mm) Shape:    Thickness:   Steel Machine suitability:  

Cup brush with abrasive grinding bristles for working on stainless steel, steel, wood and non-ferrous metals. Brush colour red: coarse Brush colour blue: fine Suitable for structuring wood Quality reference:    Grain Material suitability:   Steel   Wood Machine suitability:   Freehand angle grinder Machine suitability The HTB technical brush is designed for use with a handheld drill or an angle grinder that is equipped with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Structure and manufacture The fill material used for the HTB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality The HTB provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimension This cup brush is available in the diameters of 50 mm, 75 mm and 130 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Steel cup brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. For flexible working For careful cleaning Moulded in plastic for up to 10 times longer lifetime Shape:    Thickness:   Steel Machine suitability:   Air grinder Machine suitability The STBWGS technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and manufacture The fill material used for the STBWGS is high-quality crimped steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality The STBWGS provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush for steel is the ideal choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimension The wire thickness for the STBWGS is 0.30 mm. This cup brush is available in the diameters of 40 mm, 50 mm and 70 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Cup brush with abrasive grinding bristles for working on stainless steel, steel, wood and non-ferrous metals. Brush colour red: coarse Brush colour blue: fine Suitable for structuring wood Quality reference:    Grain Material suitability:   Steel   Wood Machine suitability:   Freehand angle grinder Machine suitability The HTB technical brush is designed for use with a handheld drill or an angle grinder that is equipped with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Structure and manufacture The fill material used for the HTB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality The HTB provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimension This cup brush is available in the diameters of 50 mm, 75 mm and 130 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.