Wheel brushes

Steel wheel brush with crimped steel wire on a 6 mm shank, for use on drills. For flexible working For careful cleaning Brass-plated for improved corrosion protection Shape:    Thickness:   Steel Machine suitability:  

Steel wheel brush with crimped steel wire on a 6 mm shank, for use on drills. For flexible working For careful cleaning Brass-plated for improved corrosion protection Shape:    Thickness:   Steel Machine suitability:  

Wheel brush with abrasive grinding bristles for processing stainless steel, steel, wood and non-ferrous metals. Long lifetime Uniform grinding performance through permanent release of grain Suitable also for structuring wood Quality reference:    Grain Material suitability:   Steel   Wood Machine suitability:   Freehand angle grinder Machine suitability The HRB technical brush is designed for use with a handheld drill or an angle grinder with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Structure and manufacture The fill material used for the HRB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality The HRB gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimension This wheel brush is available in the diameters of 75 mm, 100 mm and 140 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Steel wheel brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. High max. revolutions For careful cleaning Moulded in plastic for up to 10 times longer lifetime. Shape:    Thickness:   Steel Machine suitability:   Air grinder Machine suitability The SRBWGS technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and manufacture The fill material used for the SRBWGS is high-quality crimped steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality The SRBWGS provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for steel is the optimum choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimension The wire thickness for the SRBWGS is 0.20 mm and 0.30 mm. This wheel brush is available in the diameters of 30 mm, 40 mm, 50 mm and 60 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Stainless steel wheel brush with crimped stainless steel wire on a 6 mm shank. For flexible working For careful cleaning Homogeneous surfaces Shape:    Thickness:   Stainless steel   Non-ferrous metals Machine suitability:   Air grinder Machine suitability The ERBW technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Structure and manufacture The fill material used for the ERBW is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality The ERBW gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for stainless steel is the optimum choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimension The wire thickness for the ERBW is 0.20 mm. This wheel brush is available in the diameters of 30 mm, 40 mm and 60 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Wheel brush with abrasive grinding bristles for processing stainless steel, steel, wood and non-ferrous metals. Long lifetime Uniform grinding performance through permanent release of grain Suitable also for structuring wood Quality reference:    Grain Material suitability:   Steel   Wood Machine suitability:   Freehand angle grinder Machine suitability The HRB technical brush is designed for use with a handheld drill or an angle grinder with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Structure and manufacture The fill material used for the HRB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality The HRB gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimension This wheel brush is available in the diameters of 75 mm, 100 mm and 140 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Steel wheel brush with crimped steel wire on a 6 mm shank for use on straight grinders and flexible shafts. High max. revolutions For high brushing requirements To remove strong caking Shape:    Thickness:   Steel Machine suitability:   Air grinder Machine suitability The SRBZGS technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and manufacture The fill material used for the SRBZGS is high-quality knotted steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality The SRBZGS gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for steel is the optimum choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimension The wire thickness for the SRBZGS is 0.50 mm. This wheel brush is available with a diameter of 75 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Steel wire wheel brush with knotted steel wire, for use on angle grinders. For great cleaning performance To remove strong caking For targeted work activities Shape:    Thickness:   Steel Machine suitability:  

Steel wheel brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. High max. revolutions For careful cleaning Moulded in plastic for up to 10 times longer lifetime. Shape:    Thickness:   Steel Machine suitability:   Air grinder Machine suitability The SRBWGSK technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and manufacture The fill material used for the SRBWGSK is high-quality plastic-bonded and crimped steel wire. This plastic bond means the wire cannot simply break off. Instead, the wire tips wear down gradually over time. The end result is a brush that lasts up to ten times longer. Quality The SRBWGSK provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for steel is the optimum choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimension The wire thickness for the SRBWGSK is 0.30 mm. This wheel brush is available in the diameters of 63 mm and 76 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Stainless steel wheel brush with knotted stainless steel wire, for use on angle grinders. For great cleaning performance To remove strong caking For targeted work activities Shape:    Thickness:   Stainless steel   Freehand angle grinder Machine suitability The ERBZ technical brush is designed for use on angle grinders equipped with a 22.23 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum working results on these materials. Structure and manufacture The fill material used for the ERBZ is high-quality knotted stainless steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality With the ERBZ, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for stainless steel is the optimum choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimension The wire thickness for the ERBZ is 0.35 mm and 0.50 mm. This wheel brush is available in the diameters of 115 mm and 125 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Wheel brush with abrasive grinding bristles for processing stainless steel, steel, wood and non-ferrous metals. Long lifetime Uniform grinding performance through permanent release of grain Suitable also for structuring wood Quality reference:    Grain Material suitability:   Steel   Wood Machine suitability:   Freehand angle grinder Machine suitability The HRB technical brush is designed for use with a handheld drill or an angle grinder with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Structure and manufacture The fill material used for the HRB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality The HRB gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimension This wheel brush is available in the diameters of 75 mm, 100 mm and 140 mm. Industries This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.