Extra-thin cutting discs

Even less burr formation and even less thermal stress – leading to reduced discoloration. The XTK6 EXACT – the thinnest disc impresses with its ultra-low-noise operation. Thanks to the exceptionally precise, clean and almost burr-free cut, virtually no follow-up work is required. Although just 0.6 mm thick, this slim disc easily cuts very hard materials such as spring steel, stainless steel sheet, etc. Plenty of power in a small form factor: the narrow cut means virtually no contact pressure is required – making work easier and less tiring. The world’s thinnest freehand cutting disc Exceptional precision and virtually burr-free Minimal thermal stress, resulting in zero blueing Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Technologies:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes.  

Enables cutting and grinding in just one step – with a disc thickness of 1.9 mm. Extra-thin cutting and grinding with a single disc No disc change Safe through three full-face fabric layers Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Very innovative products with unique problem solving competence.    Products that offer special and universal competencies for multiple work applications or steps. Machine suitability For freehand use, the XTK35 CROSS cutting disc is suitable for angle grinders in any performance class. Material suitability The XTK35 CROSS has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and manufacture This combination disc contains high-quality corundum (aluminium oxide) plus 3 full-coverage glass cloth layers. For this disc, the minimum side load as defined by EN 12413 and oSa is 290 N with grinding disc approval. The expiry date (three years) is embossed in the disc hole ring. Sophisticated in-process controls applied during manufacturing (Made in Germany) ensure a consistently high level of quality. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a depressed shape with grinding disc approval (shape 27). Quality The XTK35 CROSS gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The disc is approved for both cutting and grinding work. The XTK35 CROSS offers impressive performance, with a very aggressive cut even in solid material. A key characteristic of this disc is its extremely low level of vibration. The disc also ensures a fine surface finish. All of which makes work easier and is especially cost-effective. The XTK35 CROSS offers an ideal price/performance ratio. This high-quality RHODIUS tool is especially suitable for cutting and grinding work on structural steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections and panels. Dimension This combination disc is approved for grinding work, and is available in a disc width of 1.9 mm, and in the diameters of 115 mm and 125 mm. Industries The disc is the perfect tool for handling the many jobs and challenges facing building fitters, as well as in container construction, structural steel engineering, plumbing and installation work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

At 0.8 mm, this cutting disc offers an exceptionally precise, clean and almost burr-free cut. Compatible with ASB XT mandrel. Optimal for cutting work at difficult to reach places Precise cut through 0.8 mm disc width Little bur formation Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Very innovative products with unique problem solving competence.  

Ultra high-performance thin cutting disc for the most demanding user requirements. Compatible with ASB XT mandrel. Optimal for cutting work at difficult to reach places Long lifetime Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:  

The 0.8 mm cutting disc with ultra low-noise operation. Produces a precise and nearly burr-free cut. Precise cut, less force required Minimum bur formation for less rework Cool cut reduces tarnish colours and material distortion Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Very innovative products with unique problem solving competence.    Ultra-thin cutting discs to ensure maximum precision and less rework. Machine suitability The XT8 EXACT cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Battery consumption is very light with this tool. The small contact area keeps energy consumption to a minimum. Material suitability The XT8 EXACT has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality The XT8 EXACT gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The XT8 EXACT offers impressive performance during use with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc stands out thanks to its minimal sparking, low dust generation and very low level of burr formation, while also minimising tarnish colouring on the material. All of which makes work easier and is especially cost-effective. This high-quality RHODIUS tool is especially suitable for cutting threaded rods, structural steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, plastic-coated and painted metal sheets, galvanised structural parts and cable ducts. Thanks to its narrow gap widths, this cutting disc is also ideal for MIG welding work and body work processing. Dimension With a disc width of 0.8 mm, the extra-thin cutting disc is available in the diameters of 115 mm and 125 mm. Industries This makes it the perfect tool for handling the many applications and challenges facing building fitters, as well as in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and plumbing work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

The 0.8 mm cutting disc with ultra low-noise operation. Produces a precise and nearly burr-free cut. Precise cut, less force required Minimum bur formation for less rework Cool cut reduces tarnish colours and material distortion Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Very innovative products with unique problem solving competence.    Ultra-thin cutting discs to ensure maximum precision and less rework. Machine suitability The XTK8 EXACT cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Battery consumption is very light with this tool. The small contact area keeps energy consumption to a minimum. Material suitability The XTK8 EXACT has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality With the XTK8 EXACT, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The XTK8 EXACT offers impressive performance during use with its especially light and fast cut. The disc stands out thanks to its minimal sparking, low dust generation, smooth, vibration-free operation and very low level of burr formation, while also minimising tarnish colouring on the material. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. The disc achieves low angular deviation thanks to its depressed shape. This high-quality RHODIUS tool is especially suitable for cutting threaded rods, structural steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, plastic-coated and painted metal sheets, galvanised structural parts and cable ducts. Thanks to its narrow gap widths, this cutting disc is also ideal for MIG welding work and body work processing. Dimension With a disc width of 0.8 mm, the extra-thin cutting disc is available in the diameters of 115 mm and 125 mm. Industries This makes it the perfect tool for handling the many applications and challenges in plant construction, vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and plumbing work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Cutting disc with ceramic abrasive grain. For aggressive cutting performance and a long lifetime with high-volume grinding. Cutting disc with ceramic abrasive grain High cutting speed Little bur formation Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    High-performance ceramic grain tools. For industrial high-throughput grinding applications.    Performance-optimised series of extra-thin cutting discs for 30% more performance. Machine suitability The XT100 cutting disc is suitable for freehand use on angle grinders. Material suitability The XT100 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc includes premium sintered corundum and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality With the XT100, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The XT100 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, especially light and fast cut. The disc features minimal sparking, low dust generation and vibration-free operation that offers exceptional stability. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. This product offers an ideal price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Ultra high-performance thin cutting disc for demanding user requirements. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Performance-optimised series of extra-thin cutting discs for 30% more performance.  

Ultra high-performance thin cutting disc for demanding user requirements. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Performance-optimised series of extra-thin cutting discs for 30% more performance.  

Extra-thin cutting disc offering a long lifetime and excellent price-performance ratio. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes. Machine suitability The XT38 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XT38 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Application The XT38 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT38 offers users an optimum price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports and sections. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Extra-thin cutting disc offering a long lifetime and excellent price-performance ratio. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes. Machine suitability The XTK38 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XTK38 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Application The XTK38 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT38 offers users an optimum price/performance ratio. The disc achieves low angular deviation thanks to its depressed shape. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports and sections. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:  

Extra-thin cutting disc with ceramic abrasive grain. For aggressive and long-lasting cutting performance.  Reduced burr formation  High cutting speed  For particularly hard and tough steels Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes.    Performance-optimised series of extra-thin cutting discs for 30% more performance. Machine suitability The XT200 cutting disc is suitable for freehand use on angle grinders. Material suitability The XT200 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc includes premium sintered corundum and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality With the XT200, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The XT200 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT200 EXTENDED offers users an optimum price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes. Machine suitability The XT20 cutting disc is suitable for freehand use on angle grinders. Material suitability The XT20 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively.<br>This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. The RHODIUS XT20 discs supplied in the diameters of 180 mm and 230 mm also benefit from the RHODIUS EXTENDED technology used here to offer an even longer tool lifetime. Quality To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Application The XT20 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT20 offers users an optimum price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes. Machine suitability The XTK67 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XT67 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines or with CERAMICON technology are recommended. Application The XT67 offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, thin-walled metal sheets, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

A reliable cutting disc for the cost-conscious professional. Optimised for steel applications. Also ideal for low-power machines. Little bur formation High cutting speed Fewer sparks Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:  

Extra-thin cutting disc with special fillers to prevent disc clogging. Also ideal for low-power machines. Little bur formation High cutting speed Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   m/s Machine suitability:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes. Machine suitability The XT24 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XT24 is specially designed for use on aluminium and other non-ferrous metals such as copper, brass, bronze, etc. as well as steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steel. Structure and manufacture The cutting disc uses a high-quality formulation of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality The XT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application During use, the XT24 offers impressive performance in solid material combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT24 offers users an optimum price/performance ratio. This quality tool from RHODIUS is especially suitable for cutting thin-walled metal sheets, supports and sections. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This is the perfect tool for handling the many applications and challenges facing building fitters, as well as in plant and container construction, vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Cuts tiles to leave a clean cutting edge. Good cutting performance on titanium. Also ideal for low-power machines. Little edge chipping High cutting speed Low-dust cut Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Non-ferrous metals Working speed 1:   Freehand angle grinder Machine suitability The XT66 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XT66 is especially suitable for use on cast steel and concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium and cast iron (ductile or grey cast iron, etc.). Structure and manufacture The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality The XT66 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application During use, the XT66 offers impressive performance based on a very aggressive cut. High-precision processing of thin-walled material is easily achieved. A key characteristic of this disc is its extremely low level of vibration. This cutting disc makes the job easier and is particularly economical. This high-quality RHODIUS tool is an excellent choice for cutting premium tile materials and for other jobs where edge chipping needs to be kept to a minimum. Dimension The extra-thin cutting disc with a disc width of 1.5 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries This disc is the perfect tool for working on the wide range of applications and challenges in tiling, plumbing and general renovation, as well as landscaping work.

Enables cutting and grinding in one step – with a disc thickness of 1.9 mm. Extra-thin cutting and grinding with a single disc Suitable for a variety of materials Three full-face fabric layers for extra safety Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel   Stone   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Technologies:    Products that offer special and universal competencies for multiple work applications or steps. Machine suitability The XTK69 MULTI CROSS combination disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XTK69 MULTI CROSS has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and manufacture The combination disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 3 full-coverage glass cloth layers. For this disc, the minimum side load as defined by EN 12413 and oSa is 290 N with grinding disc approval. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a depressed shape with grinding disc approval (shape 27). Quality The XTK69 MULTI CROSS gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The disc is approved for both cutting and grinding work. The XT69 MULTI CROSS offers impressive performance with an aggressive cut. A key characteristic of this disc is its extremely low level of vibration. The XTK69 MULTI CROSS makes work easier. This quality RHODIUS tool is an especially good choice for cutting structural steel, sections and beams. Dimension This combination disc is approved for grinding work, and is available in a disc width of 1.9 mm, and in the diameters of 115 mm and 125 mm. Industries This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work. Note The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

RHODIUS XT69 MULTI BOX 125x1.0x22.23 mm Extra-thin cutting disc Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. Reduced burr formation High cutting speed Fewer sparks Low edge cavitation Shape:    Thickness:   Stainless steel   Stone   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Technologies:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes. Machine suitability The XT69 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XT69 has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and manufacture The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality The XT69 MULTI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The XT69 offers impressive performance with an aggressive cut. High-precision processing of thin-walled material is easily achieved. The disc features minimal sparking and very smooth, vibration-free operation. The XT69 MULTI makes work easier. This high-quality RHODIUS tool is an especially good choice for cutting structural steel, painted sheet metal, galvanised structural parts, cable ducts, sections and beams. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 105 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.

RHODIUS XT69 MULTI BOX 115x1.0x22.23 mm Extra-thin cutting disc Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. Reduced burr formation High cutting speed Fewer sparks Low edge cavitation Shape:    Thickness:   Stainless steel   Stone   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Technologies:    Abrasive discs with patented HydroProtect technology to safeguard against moisture-related ageing processes. Machine suitability The XT69 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability The XT69 has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and manufacture The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality The XT69 MULTI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The XT69 offers impressive performance with an aggressive cut. High-precision processing of thin-walled material is easily achieved. The disc features minimal sparking and very smooth, vibration-free operation. The XT69 MULTI makes work easier. This high-quality RHODIUS tool is an especially good choice for cutting structural steel, painted sheet metal, galvanised structural parts, cable ducts, sections and beams. Dimension The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 105 mm to 230 mm. Industries This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.

RHODIUS XT15 ACCU BOX 115x1.0x22.23 mm Extra-thin cutting disc Ensures a long and gentle operating time of the battery. 10 x XT15 ACCU in the re-closable tin box. Optimised for use with battery-powered angle grinders High cutting speed Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability:  

RHODIUS XT15 ACCU BOX 125x1.0x22.23 mm Extra-thin cutting disc Ensures a long and gentle operating time of the battery. 10 x XT15 ACCU in the re-closable tin box. Optimised for use with battery-powered angle grinders High cutting speed Lifetime:    Cutting ability for thin-walled material:    Quality reference:    Width in mm Material suitability:   Steel Safety instructions:   m/s Machine suitability: