Diamond tools

Diamond cutting disc with forged segments. The high-density/pore-free bond increases cutting speed and lifetime High cutting speed Long lifetime Wet and dry cutting Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   m/s  Petrol-driven cutting machine  

The DG210 ALLCUT enables reliable, fast cutting of many materials with a cool cut. An all-rounder with extremely long lifetime, for stone and a good performer on steel Constant stock removal performance Wet and dry cutting Lifetime:    Shape:    Thickness:   All-round Working speed 1:   m/s  Petrol-driven cutting machine   Petrol-driven cutting machine Machine suitability The DG210 ALLCUT diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability The DG210 ALLCUT was specifically developed for processing reinforcing steel and light structural steel. This RHODIUS quality tool is also an excellent choice when working with granite, hard concrete with aggregates, marble, paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete and ferroconcrete, concrete and paving bricks, hard stone and flagstones, concrete tubes or kerbstones, medium-hard masonry bricks, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles, sandstone, hollow stone blocks and soft concrete blocks. Structure and manufacture The DG210 ALLCUT features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG210 ALLCUT a particularly powerful tool. The disc is vacuum brazed. Quality With the DG210 ALLCUT, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimension This diamond cutting disc is available in diameters from 115 mm to 500 mm.

Tile drill bit for use on angle grinders with an M14 thread. Cool cut through internal cooling wax Excellent service life High cutting speed Lifetime:    Quality reference:    Segment height Material suitability:   Freehand angle grinder Machine suitability The CD30 tile drill has been designed for use on angle grinders with an M14 thread. This product can be used to the full on machines from any performance class. Material suitability The CD30 has been specifically developed for processing glazed tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite as well as high-fired tiles. Structure and manufacture The internal wax layer ensures a cool cut at high cutting speeds. For small diameters in particular, this is a decisive advantage. This minimises the risk of the edge of the drill hole splintering. The RHODIUS CD30 tile drill also offers users an impressively long tool life. The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the CD30 a particularly powerful tool. The tile drill has also been laser-welded. Dimension This tile drill is available in diameters from 6 mm to 65 mm.

Diamond cutting disc with forged segments. The high-density/pore-free bond increases cutting speed and lifetime Extra-high segments for extra-long lifetime For manually operated angle grinders and petrol-driven cutting machines Less vibration while cutting Lifetime:    Shape:    Thickness:   Natural stone Working speed 1:   m/s Machine suitability:   Table saw    Very innovative products with unique problem solving competence. Machine suitability The LD410 SPEED diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability The LD410 SPEED has been specifically designed for working on granite, marble, hard paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble shingles and concrete roofing tiles. This high-quality RHODIUS tool is also an excellent choice for processing hard concrete with aggregates, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone and hollow stone blocks. Structure and manufacture The LD410 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD410 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality With the LD410 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimension This diamond cutting disc is available in diameters from 115 mm to 400 mm.

High-performance diamond cutting disc with short cutting times for marble. Short cutting time Long lifetime Wet and dry cutting Lifetime:    Shape:    Thickness:   Tiles/ceramics Working speed 1:   Freehand angle grinder Machine suitability The DG25 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The DG25 has been specifically developed for processing marble. This high-quality RHODIUS tool is also an excellent choice for processing glazed tiles. Structure and manufacture The DG25 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG25 a particularly powerful tool. The disc is sintered directly. Dimension This diamond cutting disc is available in diameters from 115 mm to 230 mm.

Diamond cutting disc for asphalt. 11 mm segment height Very safe through depth protection segments Wet and dry cutting Lifetime:    Shape:    Thickness:   Asphalt Working speed 1:   m/s Machine suitability:   Stone and joint saw Machine suitability The LD60 diamond cutting disc is designed for freehand use with petrol cut-off saws and floor saws. This product can be used to the full on machines from any performance class. Material suitability The LD60 has been specifically developed for processing asphalt. Structure and manufacture The LD60 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD60 a particularly powerful tool. The disc is also laser welded. Dimension This diamond cutting disc is available in diameters from 300 mm to 500 mm.

Tile drill bit for use on drills with a ¼” bit adapter. Cool cut through internal cooling wax Excellent service life High cutting speed Lifetime:    Quality reference:    Segment height Material suitability:   Drill Machine suitability The CD 40 tile drill bit has been designed for use on handheld drills with a 1/4” bit adapter. This product can be used to the full on machines from any performance class. Material suitability The CD40 has been specifically developed for processing glazed tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite as well as high-fired tiles. Structure and manufacture The internal wax layer ensures a cool cut at high cutting speeds. For small diameters in particular, this is a decisive advantage. This minimises the risk of the edge of the drill hole splintering. The RHODIUS CD40 tile drill also offers users an impressively long tool life. The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the CD40 a particularly powerful tool. The tile drill has also been laser-welded. Dimension This tile drill is available in the dimensions of 6x hexagonal to 14x hexagonal.

Diamond cutting disc with forged segments. The high-density/pore-free bond increases cutting speed and lifetime Up to 13 mm segment height Less vibration during cutting Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   m/s  Stone and joint saw Technologies:  

Twin-row diamond cup wheel for the cost-conscious professional. Good dust removal Good stock removal Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   Freehand angle grinder Machine suitability The DS40 diamond cup wheel is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The DS40 has been specifically developed for processing concrete and paving bricks. This high-quality RHODIUS tool is also an excellent choice for processing hard and medium-hard masonry bricks. Structure and manufacture The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the DS40 a particularly powerful tool. The cup wheel is also laser welded. Dimension This cup wheel is available in the diameters of 100 mm and 125 mm.

Thin diamond cutting disc with closed turbo cutting edge. With reinforced flange Specifically for high-fired tiles and ceramics Low dust development Lifetime:    Shape:    Thickness:   Tiles/ceramics Working speed 1:   Freehand angle grinder Technologies:  

Diamond cutting disc with turbo cutting edge. Short cutting time Good lifetime Wet and dry cutting Lifetime:    Shape:    Thickness:   Natural stone Working speed 1:   Freehand angle grinder Machine suitability The DG35 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The DG35 has been specifically developed for processing granite. This RHODIUS quality tool is also an excellent choice when processing hard concrete with aggregates, clay tubes, paving stones, clay roofing tiles, concrete and paving bricks, hard stone and flagstones, concrete roofing tiles and hollow stone blocks. Structure and manufacture The DG35 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG35 a particularly powerful tool. The disc is sintered directly. Dimension This diamond cutting disc is available in diameters from 115 mm to 230 mm.

Reliable all-rounder with short cutting times and a long lifetime. Ideal for diverse applications Short cutting times Long lifetime Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   m/s Machine suitability:   Petrol-driven cutting machine Machine suitability The LD40 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product can be used to the full on machines from any performance class. Material suitability The LD40 has been specifically designed for working on concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing granite, hard concrete with aggregates, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and manufacture The LD40 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD40 a particularly powerful tool. The disc is also laser welded. Dimension This diamond cutting disc is available in diameters from 115 mm to 400 mm.

High-performance diamond cup wheel with forged segments featuring high concentration of diamonds. Maximum stock removal performance Ideal for levelling formwork joints Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   Freehand angle grinder Machine suitability The DS1 diamond cup wheel is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability The DS1 has been specifically designed for processing hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone and flagstones. This high-quality RHODIUS tool is also an excellent choice for processing stone blocks, concrete roofing tiles and hollow stone blocks. Structure and manufacture The tool has been tested to EN 13236 and oSa. The use of a very high concentration of high-quality industrial diamonds makes the DS1 a particularly powerful tool. The diamond cup wheel is also laser welded. Quality With the DS1, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimension This diamond cup wheel is available in diameters from 115 mm to 180 mm.

Extra-thin diamond cutting disc. Extremely fast cut. Clean cutting edges Short cutting time Low dust development Lifetime:    Shape:    Thickness:   Tiles/ceramics Working speed 1:   Freehand angle grinder Machine suitability The LD1 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability The LD1 has been specifically developed for processing porcelain and ceramics as well as porcelain tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite, glazed tiles and high-fired tiles. Structure and manufacture The LD1 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD1 a particularly powerful tool. The disc is also laser welded. Quality With the LD1, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimension This diamond cutting disc is available in diameters from 115 mm to 230 mm.

Diamond cutting disc with closed cutting edge for heavy-duty cutting. Clean cutting edges Wet and dry cutting Lifetime:    Shape:    Thickness:   Tiles/ceramics Working speed 1:   Freehand angle grinder  

Diamond cup wheel with a special segment shape for abrasive materials. Prevents clogging Excellent dust removal Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   Freehand angle grinder Machine suitability The DS41 diamond cup wheel is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The DS41 has been specifically developed for processing concrete and paving bricks. This high-quality RHODIUS tool is also an excellent choice for processing hard and medium-hard masonry bricks. Structure and manufacture The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the DS41 a particularly powerful tool. The diamond cup wheel is also laser welded. Dimension This cup wheel is available in the diameters of 125 mm and 180 mm.

Thin diamond cutting disc with closed turbo cutting edge. Short cutting time Low dust development Wet and dry cutting Lifetime:    Shape:    Thickness:    Segment height for segmented diamond cutting discs Material suitability:   m/s  Freehand angle grinder  

Easy-cutting all-rounder offering excellent price-performance ratio. Diamond cutting disc with turbo cutting edge. Short cutting time Low dust development Wet and dry cutting Lifetime:    Shape:    Thickness:   Natural stone Working speed 1:   Freehand angle grinder Machine suitability The DG55 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The DG55 has been specifically developed for processing granite. Structure and manufacture The DG55 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG55 a particularly powerful tool. The disc is sintered directly. Dimension This diamond cutting disc is available in diameters from 115 mm to 230 mm.

The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature a special design that ensures the rapid transport of the cutting particles away from the disc and therefore an optimised disc lifetime. The LD300 not only offers an impressively fast cutting speed but also has an optimised lifetime. Laser-welded. Suitable for wet and dry cutting. 12 mm segment height for an even longer lifetime High-performance cutting disc suitable for many kinds of applications Specially-shaped turbo segments increase cutting speed while optimising transport of cutting particles Wet and dry cut Laser-welded Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   Freehand angle grinder Machine suitability The LD300 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability The LD300 has been specifically designed for working on hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble tiles, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone, hollow stone blocks, asphalt, green concrete and soft precast concrete blocks. This high-quality RHODIUS tool is also an excellent choice for processing paving stones, slate and concrete roofing tiles. Structure and manufacture The LD300 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD300 a particularly powerful tool. The disc is also laser welded. Quality With the LD300, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimension This diamond cutting disc is available in diameters from 115 mm to 500 mm.

Extra-thin diamond cutting disc with closed cutting edge. Clean cutting edges Short cutting time Wet and dry cutting Lifetime:    Shape:    Thickness:   Tiles/ceramics Working speed 1:   Freehand angle grinder Machine suitability The DG45 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The DG45 has been specifically designed for working on granite, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. Structure and manufacture The DG45 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG45 a particularly powerful tool. The disc is sintered directly. Dimension This diamond cutting disc is available in the diameters of 115 mm and 125 mm.

Diamond cutting disc with a excellent lifetime, for asphalt and abrasive materials and demanding user requirements. Up to 13 mm segment height Very safe through depth protection segments Wet and dry cutting Lifetime:    Shape:    Thickness:   Asphalt Working speed 1:   m/s Machine suitability:   Stone and joint saw Machine suitability The LD70 diamond cutting disc is designed for freehand use with petrol cut-off saws and floor saws. This product can be used to the full on machines from any performance class. Material suitability The LD70 has been specifically developed for processing asphalt. Structure and manufacture The LD70 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD70 a particularly powerful tool. The disc with forged segments is also laser welded. Dimension This diamond cutting disc is available in diameters from 300 mm to 500 mm.

High-performance universal cutting disc for the cost-conscious end user. Good cutting times Good lifetime Wet and dry cutting Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   m/s Machine suitability:   Table saw  

Diamond cutting disc with an aggressive cut. Above-average performance in prolonged use for demanding user requirements. Short cutting times through turbo cutting edge High diamond concentration Long lifetime Lifetime:    Shape:    Thickness:   Natural stone Working speed 1:   Freehand angle grinder Machine suitability The LD4 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The LD4 has been specifically developed for processing granite, glazed clay tubes, cast tubes and slate. This RHODIUS quality tool is also an excellent choice for processing tasks involving hard concrete with aggregates, marble, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, concrete and paving bricks, hard stone and flagstones, concrete tubes or kerbstones and medium-hard masonry bricks. Structure and manufacture The LD4 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD4 a particularly powerful tool. The disc is also laser welded. Dimension This diamond cutting disc is available in diameters from 115 mm to 230 mm.

Twin-row diamond cup wheel. Ideal for levelling formwork joints. High concentration of diamonds Long lifetime Aggressive grinding Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   Freehand angle grinder Machine suitability The DS10 diamond cup wheel is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability The DS10 has been specifically designed for processing hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, sandstone, hollow stone blocks and green concrete. This high-quality RHODIUS tool is also an excellent choice for processing hard sand-lime bricks, hard precast concrete blocks and stone blocks. Structure and manufacture The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the DS10 a particularly powerful tool. The diamond cup wheel is also laser welded. Dimension This diamond cup wheel is available in diameters from 100 mm to 180 mm.

The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature a special design that ensures the rapid transport of the cutting particles away from the disc and therefore an optimised disc lifetime. The LD300 not only offers an impressively fast cutting speed but also has an optimised lifetime. Laser-welded. Suitable for wet and dry cutting. 12 mm segment height for an even longer lifetime High-performance cutting disc suitable for many kinds of applications Specially-shaped turbo segments increase cutting speed while optimising transport of cutting particles Wet and dry cut Laser-welded Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   Freehand angle grinder Technologies:  

Thin diamond cutting disc with closed turbo cutting edge. With reinforced flange Specifically for high-fired tiles and ceramics Low dust development Lifetime:    Shape:    Thickness:   Tiles/ceramics Working speed 1:   Freehand angle grinder Machine suitability The DG15 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability The DG15 has been specifically developed for processing high-fired tiles. This high-quality RHODIUS tool is also an excellent choice for processing porcelain, granite, glazed tiles and marble. Structure and manufacture The DG15 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG15 a particularly powerful tool. The disc is sintered directly. Quality With the DG15, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimension This diamond cutting disc is available in the diameters of 115 mm and 125 mm.

Inexpensive diamond cutting disc for concrete. For angle grinders up to Ø 230 mm. The DG70 diamond cutting disc for the cost-conscious professional. Diamond segments sintered onto carrier sheet. Good value for money Wet and dry cutting Shape:    Thickness:   Concrete Working speed 1:   Freehand angle grinder Machine suitability The DG70 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability The DG70 has been specifically developed for processing concrete and paving bricks. This high-quality RHODIUS tool is also an excellent choice for processing hard stone and flagstones, concrete tubes and kerbstones. Structure and manufacture The DG70 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG70 a particularly powerful tool. The disc is sintered directly. Dimension This diamond cutting disc is available in diameters from 115 mm to 230 mm.

Diamond cutting disc with turbo cutting edge. Short cutting time Good lifetime Wet and dry cutting Lifetime:    Shape:    Thickness:   Natural stone Working speed 1:   Freehand angle grinder Technologies:  

Reliable all-rounder with short cutting times and a long lifetime. Ideal for diverse applications Short cutting times Long lifetime Lifetime:    Shape:    Thickness:   Concrete Working speed 1:   m/s Machine suitability:   Petrol-driven cutting machine Technologies:  

Diamond cutting disc with closed cutting edge for heavy-duty cutting. Clean cutting edges Wet and dry cutting Lifetime:    Shape:    Thickness:   Tiles/ceramics Working speed 1:   Freehand angle grinder    Machine suitability The DG50 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability The DG50 X-LOCK has been specifically developed for processing hard stone and flagstones. Structure and manufacture The DG50 X-LOCK features a turbo rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 X-LOCK a particularly powerful tool. The disc is sintered directly. Dimension This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.