Grinding / polishing

Aluminium oxide fibre disc – the grain enables superior stock removal performance on steel. Good stock removal performance Long lifetime Few sparks Quality reference:    Grain Material suitability:   m/s Machine suitability:  

Self-fastening disc suitable for dry sanding of paints, varnishes and fillers. Paper backing Open coated, with special stearate coating Ideal for dry sanding of body filler or paint removal Shape:    Thickness:   Paints/fillers   Non-ferrous metals Machine suitability:  

Abrasive paper with a paper backing and semi-open aluminium oxide coating. Particularly suitable for paints and varnishes Half-open coating for non-aggressive grinding Good for wood finishing Shape:    Thickness:   Non-ferrous metals   Paints/fillers Machine suitability:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Zircon fibre disc – the grain enables excellent stock removal performance on steel and stainless steel. Excellent stock removal performance Long lifetime Quality reference:    Grain Material suitability:   Steel Working speed 1:   Freehand angle grinder Machine suitability This fibre disc must be used together with a matching backing pad, such as the RHODIUS RH TURBO or the RHODIUS RH ST. Also ensure that the backing pad used has the right diameter. Material suitability Featuring high-quality zirconium, the RHODIUS KFZ fibre disc was specifically developed for processing stainless steel (e.g. V2A, 1.4301) and steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037). Quality The KFZ provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The disc contains no iron or sulphur. Dimension This fibre disc is available in the diameters of 115 mm to 180 mm and, depending on the individual variant, grits in the FEPA grit sizes of 24, 36, 40, 60 and 80.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Self fastening disc without hole system. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder   Machine suitability The RHODIUS KERR V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the RHODIUS KERR V. Structure and manufacture This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is closed-coated and bonded with a synthetic resin. An E-weight paper is used as the backing type here. Quality The KERR V self fastening disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Application This tool is an ideal choice for jobs involving cleaning and de-rusting work. This is where it makes the most of its strengths: powerful stock removal and a long tool life. Dimension This self-adhesive, self fastening disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries The KERR V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Self-fastening disc suitable for removing rust and paints. An ideal product for stock removal and burr removing – welding preparation, defect correction, structuring and finishing. Heavy F-paper backing with No-Tear technology Closed coated with synthetic resin bond for stability Fast, robust stock removal with long lifetime Shape:    Thickness:   Stainless steel   Wood   Rotary sander Adhesion:  

Self fastening disc without hole system. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder   Machine suitability The RHODIUS KERR V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the RHODIUS KERR V. Structure and manufacture This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is closed-coated and bonded with a synthetic resin. An E-weight paper is used as the backing type here. Quality The KERR V self fastening disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Application This tool is an ideal choice for jobs involving cleaning and de-rusting work. This is where it makes the most of its strengths: powerful stock removal and a long tool life. Dimension This self-adhesive, self fastening disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries The KERR V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Self fastening disc with 15-hole design for processing of paints, lacquer and fillers. Paper backing Open coated, with special stearate coating Optimal when combined with RH15 V Quality reference:    Grain Material suitability:   Wood   Rotary sander Adhesion:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Waterproof abrasive paper with silicon carbide on a paper backing. Closed coated silicon carbide for high material abrasion Fine grinding grit 2000 Flexible paper underlay for optimal workpiece adaptation Shape:    Thickness:   Stainless steel   Paints/fillers    Machine suitability This product is sold as pre-cut sheets of abrasive paper for use in manual grinding work. Material suitability This high-quality RHODIUS abrasive paper has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the WSP abrasive paper when working on paint and filler. Structure and manufacture The backing type used here is a special waterproof A/C-weight paper. The abrasive paper is coated with silicon carbide (SiC). The grain features an exceptionally closed coating. A long lifetime is ensured by the synthetic resin bonding. Quality The WSP gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The flexible paper backing lets the product adapt optimally to round surfaces. Dimension The WSP abrasive paper is available in the size 230 mm x 280 mm. To ensure an optimum working result and surface finish at all times, the user can select from many grits, ranging from 60 to 2000. Industries RHODIUS abrasive papers are perfectly suited to tackling the many applications and challenges faced in the machine and metalwork shop, in plant construction, plumbing, interior fit-out and renovation, as well as installation work. Not just for the pros: The WSP also provides home improvers and DIYers with a high-quality tool that ensures they can achieve superior cleaning results.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Self fastening disc with hole system for Festool/Bosch machines. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Rotary sander Adhesion:  

Tear-resistant self fastening disc with 15-hole design for processing of paints, lacquer and fillers. Open coated, special stearate coating avoids clogging (from 180 grit) Ideal for use together with the RH15 V backing pad Highly tear-resistant plastic foil for long lifetime Shape:    Thickness:   Stainless steel   Non-ferrous metals   GFRP Machine suitability:   Machine suitability The RHODIUS KSF15 V self fastening disc is designed for use with a rotary sander (shape CK 861). This creates a very high-performance tool when used with the RHODIUS RH15 V backing pad (available in 3 separate variants). Material suitability The product has been designed especially for processing GFRP, paint and filler, as well as stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, and also aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KSF15 V on any of the materials mentioned here. Structure and manufacture This disc is made from an abrasive foil and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is open-coated and bonded with a synthetic resin. A tear-resistant plastic foil is used as the backing type here. This ensures a long tool lifetime. The stearate coating (used from grit 180) also prevents the disc from clogging and smearing. Quality The KSF15 V self fastening disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This tool is an excellent choice for jobs involving the removal of paint, varnish and filler. The 15-hole multi-perforation ensures that sanding dust is removed constantly while working. This feature improves abrasive performance while extending the tool life of a single self fastening disc. The self fastening disc also shows its strengths to the full on rustproof or acid-proofed steels, Hardox and high-strength sheet metal. Dimension This self-adhesive self fastening disc is available with a diameter of 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 80 to 2000. Industries The KSF15 V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, and installation work.

Self-fastening disc suitable for removing rust and paints. An ideal product for stock removal and burr removing – welding preparation, defect correction, structuring and finishing. Heavy F-paper backing with No-Tear technology Closed coated with synthetic resin bond for stability Fast, robust stock removal with long lifetime Shape:    Thickness:   Stainless steel   Wood   Rotary sander Adhesion:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Self fastening disc without hole system. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder   Machine suitability The RHODIUS KERR V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the RHODIUS KERR V. Structure and manufacture This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is closed-coated and bonded with a synthetic resin. An E-weight paper is used as the backing type here. Quality The KERR V self fastening disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Application This tool is an ideal choice for jobs involving cleaning and de-rusting work. This is where it makes the most of its strengths: powerful stock removal and a long tool life. Dimension This self-adhesive, self fastening disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries The KERR V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Aluminium oxide, for processing steel Quality reference:    Grain Material suitability:   Straight grinder  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Abrasive paper with especially flexible cloth backing. Closed coated aluminium oxide for high material abrasion Synthetic resin bonding for long lifetime Shape:    Thickness:   Stainless steel   Wood Machine suitability:  

Abrasive non-woven sheets with fine, flexible fibres for a good surface finish. Flexible for optimum adjustment to the workpiece Uniform surface finish Quality reference:    Grain Material suitability:   Steel   GFRP Machine suitability:  

Abrasive sleeves for mounting the matching SHEK expanding body. Cotton interior reinforcement. High stock removal performance Small dimensions for working where space is at a premium Zirconium, for processing steel and stainless steel Quality reference:    Grain Material suitability:   Steel Machine suitability:   Air grinder Machine suitability This RHODIUS abrasive sleeve is designed for use with a straight grinder or with a flexible shaft drive machine. To clamp the sleeve in place, please use the RHODIUS SHEK expanding body. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will achieve very good results with the RHODIUS ESH on any of the materials listed here. Structure and manufacture This product uses zirconium, which ensures high abrasive performance. The abrasive sleeve also features a special cotton interior reinforcement. Quality The ESH abrasive sleeve provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality abrasive sleeve from RHODIUS is the tool of choice for the precise and effective polishing of rounded or small parts. The compact size of this product also makes it easy to work with in confined spaces. Dimension Designed for use with straight grinders or flexible shaft drive machines, this abrasive sleeve is available in a range of variants, from 15 mm x 30 mm to 22 mm x 20 mm and 45 mm x 30 mm. To ensure an optimum working result and surface finish at all times, the user can select from a grit of 50 or 80. Industries The RHODIUS ESH abrasive sleeve is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Ceramic grain fibre disc – the grain enables superior stock removal performance in a short period of time with a very long lifetime. Especially suitable for hardened and tempered steels, tinder areas and titanium Perceivably faster stock removal Long lifetime Quality reference:    Grain Material suitability:   Steel Working speed 1:   Freehand angle grinder Technologies:  

Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Wood Machine suitability:  

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

Flexible continuous-feed belt with ceramic grain for hand-guided belt grinders. Bond made from synthetic resin enriched with abrasive grains for a cooler cut Closed coating for high stock removal performance on steel and stainless steel Flexible, tear-resistant cotton T-fabric for a long lifetime Quality reference:    Grain Material suitability:   Steel Machine suitability:    High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability The RHODIUS ESB CL abrasive belt is a flexible continuous-feed belt designed for use with a handheld belt grinder. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is a flexible and tear-resistant T-weight cotton cloth. The belt is coated with a self-sharpening and especially aggressive ceramic grain. The grain features an exceptionally closed coating. The synthetic resin bond with active grinding additives (top size) keeps grinding work cool. Quality The ESB CL provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The high-quality abrasive belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimension The ESB CL abrasive belt for handheld belt grinders is available in many variants, and in widths of 10 mm and 20 mm as well as in lengths of 330 mm and 520 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 36 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.

A high-performance zircon flap disc for the cost-conscious professional. Good lifetime High stock removal performance Tough fibre glass carrier Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability The RHODIUS LSZ F2 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers a very high level of stock removal performance. Structure and manufacture The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F2 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Application This quality tool is perfectly suited to universal use in the workplace. Dimension The flap disc is available in diameters from 100 mm to 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.

Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Steel Machine suitability:  

An attractively-priced flap disc with zirconium. Good stock removal performance Proven quality with cotton backing High service life Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability The RHODIUS LGZ P3 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The disc is manufactured and safety-tested to EN 13743, and is oSa-certified. The backing pad is made from polyamide. This enables very gentle grinding work. The LGZ P3 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Application This quality tool is perfectly suited to universal use in the workplace. Dimension The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.

An attractively-priced flap disc with Zirconium. Good stock removal performance Proven quality with cotton backing High service life Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability The RHODIUS LGZ F3 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers a very high level of stock removal performance. Structure and manufacture The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F3 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Application This quality tool is perfectly suited to universal use in the workplace. Dimension The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.

An attractively-priced flap disc with Zirconium. Good stock removal performance Proven quality with cotton backing High service life Lifetime:    Shape:    Thickness:   Stainless steel   m/s Machine suitability:  

Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Wood Machine suitability:  

Flexible continuous-feed belt with ceramic grain for hand-guided belt grinders. Bond made from synthetic resin enriched with abrasive grains for a cooler cut Closed coating for high stock removal performance on steel and stainless steel Flexible, tear-resistant cotton T-fabric for a long lifetime Quality reference:    Grain Material suitability:   Steel Machine suitability:    High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability The RHODIUS ESB CL abrasive belt is a flexible continuous-feed belt designed for use with a handheld belt grinder. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is a flexible and tear-resistant T-weight cotton cloth. The belt is coated with a self-sharpening and especially aggressive ceramic grain. The grain features an exceptionally closed coating. The synthetic resin bond with active grinding additives (top size) keeps grinding work cool. Quality The ESB CL provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The high-quality abrasive belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimension The ESB CL abrasive belt for handheld belt grinders is available in many variants, and in widths of 10 mm and 20 mm as well as in lengths of 330 mm and 520 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 36 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.

Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Wood Machine suitability:  

A high-performance zircon flap disc for the cost-conscious professional. Good lifetime High stock removal performance Tough fibre glass carrier Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class. Material suitability The RHODIUS LGZ F2 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers a very high level of stock removal performance. Structure and manufacture The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F2 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Application This quality tool is perfectly suited to universal use in the workplace. Dimension The flap disc is available in the diameters of 115 mm, 125 mm and 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.

Standard aluminium oxide flap disc with fibre glass support. Excellent performance on steel. Long lifetime Quick stock removal Tough fibre glass carrier Lifetime:    Shape:    Thickness:   Steel Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class. Material suitability The RHODIUS LSA F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSA F1 features a high-quality aluminium oxide (corundum) abrasive grain. This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Application The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Dimension The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.

The ideal, long-life flap disc for grinding aluminium and other clog-prone non-ferrous metals. Special coating of the flap belt Notched carrier for gentle loosening Trimmable ABS carrier Lifetime:    Shape:    Thickness:   Wood   m/s Machine suitability:  

Flap wheel with a 6 mm shank. Large synthetic resin core for long lifetime Flexible X-cloth for good adaptation to the workpiece Good stock removal performance Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Standard aluminium oxide flap disc with polyamide support. Excellent performance on steel. Long lifetime Quick stock removal Vibration-reducing polyamide support Lifetime:    Shape:    Thickness:   Steel Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class. Material suitability The RHODIUS LSA P1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and manufacture The disc is manufactured and safety-tested to EN 13743, and is oSa-certified. The backing pad is made from polyamide. This enables very gentle grinding work. The LSA P1 features a high-quality aluminium oxide (corundum) abrasive grain. This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality The LSA P1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Application The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Dimension The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.

Zircon flap disc with fibre glass support. Excellent performance on stainless steel and optimum performance on steel. Long lifetime Quick stock removal Tough fibre glass carrier Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class. Material suitability The RHODIUS LGZ F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and manufacture The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F1 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Quality The LGZ F1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Dimension The flap disc is available in the diameters of 115 mm, 125 mm and 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.

Zircon flap disc with fibre glass support. Excellent performance on stainless steel and optimum performance on steel. Long lifetime Quick stock removal Tough fibre glass carrier Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class. Material suitability The RHODIUS LSZ F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and manufacture The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F1 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality The LSZ F1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Dimension The flap disc is available in diameters from 115 mm to 180 mm, and, depending on the variant, in the FEPA grit sizes of 24, 40, 60, 80 and 120. Note RHODIUS also manufactures this flap disc for angle grinders using the X-LOCK quick change system.

Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Wood Machine suitability:  

Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference:    Grain Material suitability:   Wood Machine suitability:  

Zircon flap disc offering maximum stock removal performance combined with a very long lifetime. Maximum lifetime Excellent stock removal Very good performance on steel, also suitable for stainless steel Shape:    Thickness:   Iron- and sulphur-freeMachine suitability This flap disc is suitable for use on angle grinders from any performance class. Material suitability The RHODIUS LSZ FB flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and manufacture The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ FB utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality The LSZ FB gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The LSZ FB offers users a very long tool lifetime. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. This premium tool is the perfect choice for demanding grinding work and offers an optimum price/performance ratio. Dimension The flap disc is available in diameters from 115 mm to 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.

Flap wheel with a 6 mm shank. Large synthetic resin core for long lifetime Flexible X-cloth for good adaptation to the workpiece Good stock removal performance Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Flap wheel with a 6 mm shank. Large synthetic resin core for long lifetime Flexible X-cloth for good adaptation to the workpiece Good stock removal performance Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Zircon flap disc with polyamide support. Excellent performance on stainless steel and optimum performance on steel. Long lifetime Quick stock removal Vibration-reducing polyamide support Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Machine suitability This flap disc is suitable for use on angle grinders from any performance class. Material suitability The RHODIUS LSZ P1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and manufacture The disc is manufactured and safety-tested to EN 13743, and is oSa-certified. The backing pad is made from polyamide. This enables very gentle grinding work. The LSZ P1 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Application The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Dimension The flap disc is available in the diameters of 115 mm, 125 mm and 180 mm, and, depending on the variant, in the FEPA grit sizes of 24, 40, 60, 80 and 120.

Flap wheel with a 6 mm shank. Large synthetic resin core for long lifetime Flexible X-cloth for good adaptation to the workpiece Good stock removal performance Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Zircon flap disc with polyamide support. Excellent performance on stainless steel and optimum performance on steel. Long lifetime Quick stock removal Vibration-reducing polyamide support Lifetime:    Shape:    Thickness:   Stainless steel   Iron- and sulphur-free Working speed 1:   Freehand angle grinder Technologies: