
Abrasive belts

4
Variants
10 x 330 mm
Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €1.07*

4
Variants
13 x 457 mm
Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €1.20*

4
Variants
9 x 533 mm
Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €1.25*

4
Variants
12 x 520 mm
Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €1.30*

4
Variants
20 x 520 mm
Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €1.36*

2
Variants
30 x 533 mm
Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Wood Machine suitability:
From €1.51*

4
Variants
30 x 533 mm
Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €1.56*

4
Variants
10 x 330 mm
Flexible continuous-feed belt with ceramic grain for hand-guided belt grinders. Bond made from synthetic resin enriched with abrasive grains for a cooler cut Closed coating for high stock removal performance on steel and stainless steel Flexible, tear-resistant cotton T-fabric for a long lifetime Quality reference: Grain Material suitability: Steel Machine suitability: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability The RHODIUS ESB CL abrasive belt is a flexible continuous-feed belt designed for use with a handheld belt grinder. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is a flexible and tear-resistant T-weight cotton cloth. The belt is coated with a self-sharpening and especially aggressive ceramic grain. The grain features an exceptionally closed coating. The synthetic resin bond with active grinding additives (top size) keeps grinding work cool. Quality The ESB CL provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The high-quality abrasive belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimension The ESB CL abrasive belt for handheld belt grinders is available in many variants, and in widths of 10 mm and 20 mm as well as in lengths of 330 mm and 520 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 36 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €1.79*

4
Variants
40 x 760 mm
Flexible continuous-feed belt for hand-guided belt grinders. Closed coating for high material abrasion Tear-resistant X-cloth for long lifetime coupled with flexibility Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €1.98*

6
Variants
75 x 457 mm
Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Wood Machine suitability:
From €2.11*

4
Variants
20 x 520 mm
Flexible continuous-feed belt with ceramic grain for hand-guided belt grinders. Bond made from synthetic resin enriched with abrasive grains for a cooler cut Closed coating for high stock removal performance on steel and stainless steel Flexible, tear-resistant cotton T-fabric for a long lifetime Quality reference: Grain Material suitability: Steel Machine suitability: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability The RHODIUS ESB CL abrasive belt is a flexible continuous-feed belt designed for use with a handheld belt grinder. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is a flexible and tear-resistant T-weight cotton cloth. The belt is coated with a self-sharpening and especially aggressive ceramic grain. The grain features an exceptionally closed coating. The synthetic resin bond with active grinding additives (top size) keeps grinding work cool. Quality The ESB CL provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The high-quality abrasive belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimension The ESB CL abrasive belt for handheld belt grinders is available in many variants, and in widths of 10 mm and 20 mm as well as in lengths of 330 mm and 520 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 36 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €2.19*

5
Variants
75 x 533 mm
Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Wood Machine suitability:
From €2.19*

3
Variants
100 x 620 mm
Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Wood Machine suitability:
From €2.78*

5
Variants
100 x 610 mm
Continuous-feed belt for belt grinders. Aluminium oxide closed coating for high material abrasion on steel and wood Tear-resistant X-cloth for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Wood Machine suitability:
From €2.84*

3
Variants
9 x 533 mm
Non-woven continuous-feed belt for hand-guided belt grinders. X-Flex, very flexible No delamination Uniform surface finish Quality reference: Grain Material suitability: Steel Belt grinder Machine suitability The RHODIUS ESB V abrasive belt is a flexible continuous-feed non-woven belt designed for use with a handheld belt grinder or tube belt grinder. Material suitability This product has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is an X-flex cloth with fine non-woven nylon fibres. The belt is coated with high-quality aluminium oxide. Quality The ESB V gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS abrasive belts from the premium TOP line are recommended. Application The high-quality non-woven belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimension The ESB V non-woven belt for handheld belt grinders is available in many variants, and in widths from 9 mm to 40 mm as well as in lengths of 533 mm and 760 mm. To ensure an optimum working result and surface finish at all times, the user can select from several non-woven types: coarse, medium and very fine. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €4.20*

4
Variants
75 x 2000 mm
Continuous-feed belt with zirconium for stationary belt grinders. Zirconium closed coating for high material abrasion on steel and stainless steel Tear-resistant Y-polyester fabric, waterproof for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €6.81*

3
Variants
75 x 2000 mm
Continuous-feed belt with standard aluminium oxide for stationary belt grinders. Aluminium oxide closed coating for high material abrasion on steel Tear-resistant Y-polyester fabric, waterproof for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Stationary belt grinder Machine suitability The RHODIUS ESB KX abrasive belt is a continuous-feed belt designed for use on a stationary belt grinder. Material suitability This product has been designed especially for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on these materials. Structure and manufacture The backing type used here is a heavy, waterproof Y-weight polyester cloth. The belt is coated with aluminium oxide. The grain features an exceptionally closed coating. Extra safety is provided by the 3 full-coverage cloth layers. Quality The ESB KX gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS abrasive belts from the premium TOP line are recommended. Application The high-quality long belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimension The ESB KX abrasive belt for stationary belt grinders is available in many variants, and in widths from 75 mm to 150 mm as well as in a length of 2000 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €6.81*

3
Variants
30 x 533 mm
Non-woven continuous-feed belt for hand-guided belt grinders. X-Flex, very flexible No delamination Uniform surface finish Quality reference: Grain Material suitability: Steel Belt grinder Machine suitability The RHODIUS ESB V abrasive belt is a flexible continuous-feed non-woven belt designed for use with a handheld belt grinder or tube belt grinder. Material suitability This product has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is an X-flex cloth with fine non-woven nylon fibres. The belt is coated with high-quality aluminium oxide. Quality The ESB V gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS abrasive belts from the premium TOP line are recommended. Application The high-quality non-woven belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimension The ESB V non-woven belt for handheld belt grinders is available in many variants, and in widths from 9 mm to 40 mm as well as in lengths of 533 mm and 760 mm. To ensure an optimum working result and surface finish at all times, the user can select from several non-woven types: coarse, medium and very fine. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €6.89*

4
Variants
100 x 2000 mm
Continuous-feed belt with zirconium for stationary belt grinders. Zirconium closed coating for high material abrasion on steel and stainless steel Tear-resistant Y-polyester fabric, waterproof for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €9.09*

3
Variants
75 x 2500 mm
Continuous-feed belt with zirconium for stationary belt grinders. Zirconium closed coating for high material abrasion on steel and stainless steel Tear-resistant Y-polyester fabric, waterproof for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €9.47*

3
Variants
75 x 2000 mm
Continuous-feed belt with ceramic grain for stationary belt grinders. Bond from synthetic resin with abrasive grain fillers for cooler grinding Closed coating for high stock removal performance on steel and stainless steel Tear-resistant X-polyester fabric, waterproof for a long lifetime Quality reference: Grain Material suitability: Steel Machine suitability: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability The RHODIUS ESB CX abrasive belt is a continuous-feed belt designed for use on a stationary belt grinder. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is a heavy, waterproof X-weight polyester cloth. The belt is coated with a self-sharpening and especially aggressive ceramic grain. The grain features an exceptionally closed coating. The synthetic resin bond with active grinding additives (top size) keeps grinding work cool. Quality The ESB CX provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The high-quality long belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimension The ESB CX abrasive belt for stationary belt grinders is available in many variants, and in widths from 75 mm to 150 mm as well as in a length of 2000 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €10.66*

3
Variants
150 x 2000 mm
Continuous-feed belt with standard aluminium oxide for stationary belt grinders. Aluminium oxide closed coating for high material abrasion on steel Tear-resistant Y-polyester fabric, waterproof for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Stationary belt grinder Machine suitability The RHODIUS ESB KX abrasive belt is a continuous-feed belt designed for use on a stationary belt grinder. Material suitability This product has been designed especially for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on these materials. Structure and manufacture The backing type used here is a heavy, waterproof Y-weight polyester cloth. The belt is coated with aluminium oxide. The grain features an exceptionally closed coating. Extra safety is provided by the 3 full-coverage cloth layers. Quality The ESB KX gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS abrasive belts from the premium TOP line are recommended. Application The high-quality long belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimension The ESB KX abrasive belt for stationary belt grinders is available in many variants, and in widths from 75 mm to 150 mm as well as in a length of 2000 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €11.45*

4
Variants
150 x 2000 mm
Continuous-feed belt with zirconium for stationary belt grinders. Zirconium closed coating for high material abrasion on steel and stainless steel Tear-resistant Y-polyester fabric, waterproof for long lifetime Safe through three full-face fabric layers Quality reference: Grain Material suitability: Steel Machine suitability:
From €12.02*

3
Variants
40 x 760 mm
Non-woven continuous-feed belt for hand-guided belt grinders. X-Flex, very flexible No delamination Uniform surface finish Quality reference: Grain Material suitability: Steel Belt grinder Machine suitability The RHODIUS ESB V abrasive belt is a flexible continuous-feed non-woven belt designed for use with a handheld belt grinder or tube belt grinder. Material suitability This product has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is an X-flex cloth with fine non-woven nylon fibres. The belt is coated with high-quality aluminium oxide. Quality The ESB V gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS abrasive belts from the premium TOP line are recommended. Application The high-quality non-woven belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimension The ESB V non-woven belt for handheld belt grinders is available in many variants, and in widths from 9 mm to 40 mm as well as in lengths of 533 mm and 760 mm. To ensure an optimum working result and surface finish at all times, the user can select from several non-woven types: coarse, medium and very fine. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €12.58*

3
Variants
150 x 2000 mm
Continuous-feed belt with ceramic grain for stationary belt grinders. Bond from synthetic resin with abrasive grain fillers for cooler grinding Closed coating for high stock removal performance on steel and stainless steel Tear-resistant X-polyester fabric, waterproof for a long lifetime Quality reference: Grain Material suitability: Steel Machine suitability: High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability The RHODIUS ESB CX abrasive belt is a continuous-feed belt designed for use on a stationary belt grinder. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is a heavy, waterproof X-weight polyester cloth. The belt is coated with a self-sharpening and especially aggressive ceramic grain. The grain features an exceptionally closed coating. The synthetic resin bond with active grinding additives (top size) keeps grinding work cool. Quality The ESB CX provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The high-quality long belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimension The ESB CX abrasive belt for stationary belt grinders is available in many variants, and in widths from 75 mm to 150 mm as well as in a length of 2000 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.
From €20.08*
Lorem ipsum dolor sit amet
frontend.navigation.page
Lorem ipsum dolor sit amet
frontend.navigation.page


























