Quick-Change system

Aluminium oxide fibre disc for the quick change system – the grain enables excellent stock removal performance on steel. Good stock removal Long lifetime Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Non-ferrous metals Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS KFS QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability The product has been designed especially for processing steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFS QUICK on any of the materials listed here. Structure and manufacture Developed for the quick change system, this fibre disc uses aluminium oxide as an abrasive grain and achieves good stock removal performance while simultaneously offering a long product lifetime. The backing type used here is a polyester-based X-weight cloth. Quality The RHODIUS KFS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for high-precision grinding work on steel, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The KFS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from various grits, ranging from 24 to 120. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools makes work easier by offering first-class performance on steel and non-ferrous metals.

Zirconium fibre disc for the quick change system – the grain enables excellent stock removal performance on steel and stainless steel. Excellent stock removal Grinding active filler material for cool, rapid grinding Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Aluminium oxide fibre disc for the quick change system – the grain enables excellent stock removal performance on steel. Good stock removal Long lifetime Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Non-ferrous metals Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS KFS QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability The product has been designed especially for processing steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFS QUICK on any of the materials listed here. Structure and manufacture Developed for the quick change system, this fibre disc uses aluminium oxide as an abrasive grain and achieves good stock removal performance while simultaneously offering a long product lifetime. The backing type used here is a polyester-based X-weight cloth. Quality The RHODIUS KFS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for high-precision grinding work on steel, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The KFS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from various grits, ranging from 24 to 120. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools makes work easier by offering first-class performance on steel and non-ferrous metals.

Ceramic grain fibre disc for the quick change system – the grain enables rapid and superior stock removal performance. Especially suitable for hardened and tempered steels, tinder areas and titanium Perceivably faster stock removal Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Straight grinder    High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability A backing pad is required when using the RHODIUS KFK QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFK QUICK on any of the materials listed here. Structure and manufacture Developed for the quick change system, this fibre disc utilises self-sharpening high-performance ceramic abrasive grain that provides an impressive level of cleaning performance. The backing type used here is a polyester-based X-weight cloth. Quality With the RHODIUS KFK QUICK quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This tool is an excellent choice for high-precision grinding work, and especially where this involves very small spaces or hard-to-reach areas. This product is especially well-suited to processing quenched steel, tinder areas and titanium. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The KFK QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 36, 60, 80 and 120. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.

Zirconium fibre disc for the quick change system – the grain enables excellent stock removal performance on steel and stainless steel. Excellent stock removal Grinding active filler material for cool, rapid grinding Rapid tool changeover without sticking or slippage Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Non-woven tool for the quick change system. For fine grinding work. Uniform surface finish High proportion of grain binder for long lifetime Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Paints/fillers Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS VLS QUICK quick change mini non-woven disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the VLS QUICK when working on paint and filler. Structure and manufacture The non-woven disc for the quick change system is especially well-suited to fine grinding and pre-polishing work. The high proportion of grain binder used with this non-woven disc ensures a particularly long lifetime. Quality The RHODIUS VLS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for jobs that require a very even surface finish or pre-polishing finish. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The VLS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit variants: coarse/100, medium/180 and fine/280. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.

Non-woven tool for the quick change system. For fine grinding work. Uniform surface finish High proportion of grain binder for long lifetime Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Paints/fillers Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS VLS QUICK HD quick change mini non-woven disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the VLS QUICK HD when working on paint and filler. Structure and manufacture The non-woven disc for the quick change system is especially well-suited to fine grinding and pre-polishing work. The high proportion of grain binder plus the self-sharpening, ceramic high-performance abrasive grain used with this non-woven disc ensures a particularly long tool lifetime. Quality The RHODIUS VLS QUICK HD quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for jobs that require a very even surface finish. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The VLS QUICK HD is available with a diameter of 51 mm. To ensure an optimum working result and surface finish, the user can choose from the grit variants of coarse/HD (K50) or medium/HD (K80). Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.

Ceramic grain fibre disc for the quick change system – the grain enables rapid and superior stock removal performance. Especially suitable for hardened and tempered steels, tinder areas and titanium Perceivably faster stock removal Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Straight grinder    High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability A backing pad is required when using the RHODIUS KFK QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFK QUICK on any of the materials listed here. Structure and manufacture Developed for the quick change system, this fibre disc utilises self-sharpening high-performance ceramic abrasive grain that provides an impressive level of cleaning performance. The backing type used here is a polyester-based X-weight cloth. Quality With the RHODIUS KFK QUICK quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This tool is an excellent choice for high-precision grinding work, and especially where this involves very small spaces or hard-to-reach areas. This product is especially well-suited to processing quenched steel, tinder areas and titanium. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The KFK QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 36, 60, 80 and 120. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.

Zirconium flap disc for the quick change system, offering maximum stock removal performance combined with a very long lifetime. Maximum lifetime Excellent stock removal performance Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Non-woven tool for the quick change system. For fine grinding work. Uniform surface finish High proportion of grain binder for long lifetime Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Paints/fillers Machine suitability:   Air grinder Machine suitability A backing pad is required when using the RHODIUS VLS QUICK quick change mini non-woven disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the VLS QUICK when working on paint and filler. Structure and manufacture The non-woven disc for the quick change system is especially well-suited to fine grinding and pre-polishing work. The high proportion of grain binder used with this non-woven disc ensures a particularly long lifetime. Quality The RHODIUS VLS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Application This tool is an excellent choice for jobs that require a very even surface finish or pre-polishing finish. The quick change system permits rapid tool changeover without sticking or slippage. Dimension The VLS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit variants: coarse/100, medium/180 and fine/280. Industries A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.

Zirconium flap disc for the quick change system, offering maximum stock removal performance combined with a very long lifetime. Maximum lifetime Excellent stock removal performance Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Unitised disc for use with the quick change system. For burr removing, blending and finishing. Decorative surface finish Long lifetime Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Unitised disc for use with the quick change system. For burr removing, blending and finishing. Decorative surface finish Long lifetime Quick tool change without bonding or sliding Quality reference:    Grain Material suitability:   Steel   Straight grinder