Ball bearing extractors

Ball bearing extractor M10x160 - GEDORE 1.29/1 - 8011000 For removing ball bearings that are both on a shaft and in a housing The legs selected using the table are inserted into the ball race, evenly distributed in the outer ring according to the number of balls The support rings supplied for the ball bearings to be removed are placed on the bearings’ inner races The head with spindle is then placed on the centering depression of the shaft and the spindle put under tension with the legs Delivery contains head and spindle. Please order suitable legs separately!

Head small 3 slots - GEDORE 192/1-3 - 1574485 Pulling legs No. 1.92/10 to 1.92/70 = set of 4 pieces For spindle 1.1406200: please also order adaptor 192/A-2

Set of 4 pulling legs 140 mm - GEDORE 1.29/10 - 8011510 Set of 4 pulling legs 140 mm

Set of ball bearing extractors PLUS - GEDORE 1.92/1 - 1553534 Using the ball bearing extractor, the removal of shaft-mounted ball bearings in a housing is now possible without any problems Due to its great degree of functionality combined with the simplified handling, this design makes a PLUS in effectiveness and productivity possible This tool is easy to use: The legs are fixed in the slot The self-locking arrangement means that the force applied is 100 % utilised Secure at all times against slipping off - and a straight pulling force for precise working Suitable for more than 40 standard ball bearings up to 6311 1.92/1 for bearings: 6000-6010, 6200-6205, 6300-6304 1.92/2 for bearings: 6011-6012, 6206-6212, 6305-6311, 6403-6407 1.92/12 for bearings: 6000-6012, 6200-6212, 6300-6311, 6403-6407 (*) with supporting ring 6309 ()() with supporting ring 6310 ()()(*) with supporting ring 6311

Ball bearing extractor set in i-BOXX 72 module - GEDORE 1101 CT-1.29/1K - 2964414 Ball bearing extractor set for more than 30 ball bearings For removing ball bearings that are both on a shaft and in a housing Non-destructive removal of deep-groove ball bearings without dismantling the shaft; no necessity to drill open the bearing cage (no chippings) With Check-Tool insert for quick check of completeness Insert for use in drawers with min. dimensions 340 x 260 x 60 mm In GEDORE i-BOXX® 72 No. 1101 L Dimensions: W 367 x D 316 x H 72 mm Contents: 1x Spindle 14 mm, M10x1.5, 160 mm 129.106 GEDORE 129.106 (1084739) 1x Spindle 17 mm, M14x2.0, 210 mm 129.306 GEDORE 129.306 (1084755)

Ball bearing extractor set in i-BOXX 72 - GEDORE 1101-1.29/1K - 2963485 Ball bearing extractor set for more than 30 ball bearings For removing ball bearings that are both on a shaft and in a housing Non-destructive removal of deep-groove ball bearings without dismantling the shaft; no necessity to drill open the bearing cage (no chippings) With Check-Tool insert for quick check of completeness Insert for use in drawers with min. dimensions 340 x 260 x 60 mm In GEDORE i-BOXX® 72 No. 1101 L Dimensions: W 367 x D 316 x H 72 mm Contents: 1x Spindle 14 mm, M10x1.5, 160 mm 129.106 GEDORE 129.106 (1084739) 1x Spindle 17 mm, M14x2.0, 210 mm 129.306 GEDORE 129.306 (1084755)

Ball bearing extractor set in i-BOXX 72 - GEDORE 1101-1.29/3K - 2964392 Ball bearing extractor set for more than 40 ball bearings For removing ball bearings that are both on a shaft and in a housing Non-destructive removal of deep-groove ball bearings without dismantling the shaft; no necessity to drill open the bearing cage (no chippings) With Check-Tool insert for quick check of completeness Insert for use in drawers with min. dimensions 340 x 260 x 60 mm In GEDORE i-BOXX® 72 No. 1101 L Dimensions: W 367 x D 316 x H 72 mm Contents: 1x Spindle 14 mm, M10x1.5, 160 mm 129.106  1x Spindle 17 mm, M14x2.0, 210 mm 129.306  1x Spindle 19 mm, M18x2.5, 230 mm 129.406  1x Spindle 22 mm, M20x2.5, 235 mm 129.506  1x Foam insert i-BOXX 72, empty EI-1101 CT-1.29/3K