Separators

Extension rod M10 - GEDORE 1.38/AV - 8018440 • Extension rods for separator pullers 1.38

Separator puller 40-120 mm - GEDORE 1.38/0 - 8017550 These separator pullers are used together with the bearing separators 1.40 The tension bolts are screwed into the threaded holes in the bearing separators

Bearing separator 5-60 mm - GEDORE 1.40/0 - 8019680 For removing taper roller and ball bearings, inner bearing races, and other tightly-seated or thin-walled parts Operation: To remove tightly-seated parts, the sharp edges of the separator blades are pressed behind the part and it is then withdrawn using the correct puller no. 1.38. To avoid damage to delicate parts, the flat surfaces of the separator blades are used. This produces a large support surface that prevents deformation.

Separator and puller set 1.38/0+1.38/AV+1.40/0 - GEDORE 1.41/0 - 8109750 Set comprising separator, puller, and extension rods In sheet metal case

Separator and puller set in L-BOXX 136 - GEDORE 1100-1.41/2A - 2927284 For clamping depths from Ø 22 to 115 mm and clamping reach up to 295 mm Incl. threaded inserts for internal threads M8-M18 For loosening and pulling tightly-seated parts e.g. taper roller bearings and inner bearing races The clamping reach can be extended with extension rods 1.38/AV-FV from 195 to 295 mm 1100 CT2-1.41/2A to retrofit existing L-BOXX®es 136 With Check-Tool insert for quick check of completeness As tools are fully sunk in the foam, the equipped insert can be stacked Insert for use in drawers with min. dimensions 400 x 310 x 60 mm