Sockets 1/2"
.png)
27
Variants
Socket 1/2" 36 mm - GEDORE D 19 36 - 2194686 Acc. to DIN 3124, ISO 2725-1 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip GEDORE vanadium steel 31CrV3, polished, chrome-plated (*) not standardised
From €8.18*
27
Variants
Socket 1/2" 36 mm - GEDORE 19 36 - 1718711 Acc. to DIN 3124, ISO 2725-1 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip GEDORE vanadium steel 31CrV3, polished, chrome-plated (*) not standardised
From €8.18*
20
Variants
Socket 1/2" 5/16" - GEDORE D 19 5/16AF - 6136060 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip GEDORE vanadium steel 31CrV3, polished, chrome-plated
From €10.38*
11
Variants
Screwdriver bit socket 1/2" in-hex 4 mm - GEDORE IN 19 4 - 6153070 Acc. to DIN 7422 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated IN 19 17 for oil filter and drain plug screws (*) not standardised
From €10.38*
9
Variants
Screwdriver bit socket 1/2" in-hex 3/16" - GEDORE IN 19 3/16AF - 6154710 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated
From €11.67*
6
Variants
Screwdriver bit socket 1/2" ball-end in-hex 12 mm - GEDORE IN 19 K 12 - 1621513 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish Total swivel angle approx. 15-20°
From €12.04*
8
Variants
Socket 1/2" TORX E10 - GEDORE TX 19 E10 - 6145720 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip GEDORE vanadium steel 31CrV3, polished, chrome-plated TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
From €12.33*
14
Variants
Screwdriver bit socket 1/2", long 7 mm - GEDORE IN 19 L 7-140 - 2950960 Acc. to DIN 7422 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated (*) t = stepped hexagon bit 13 mm (*) not standardised
From €12.96*
9
Variants
Screwdriver bit socket 1/2" TORX T20 - GEDORE ITX 19 T20 - 6152930 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
From €17.28*
3
Variants
Screwdriver bit socket 1/2" PH 2 - GEDORE IKS 19 2 - 6656650 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish Tip as per DIN ISO 8764-1 PH
From €17.28*
3
Variants
Screwdriver bit socket 1/2" PZ 2 - GEDORE IKS 19 PZD 2 - 6156680 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish Tip as per DIN ISO 8764-1 PZ
From €17.28*
6
Variants
Screwdriver bit socket 1/2", long 14 mm - GEDORE IN 19 LK 14-140 - 1936328 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish Total swivel angle approx. 15-20°
From €17.97*
13
Variants
Socket 1/2" short 13 mm - GEDORE 19 SK 13 - 2225875 With hexagon drive For use with reversible ratchet no. 1993 U-20 SK Torques specification required to standard DIN 3124 is exceeded GEDORE steel 42CrMo4, chrome-plated
From €18.69*
7
Variants
Screwdriver bit socket 1/2" 6.5x1.2 mm - GEDORE IS 19 6,5x1,2 - 6161760 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated Blade as per DIN ISO 2380-1, Form B
From €19.35*
8
Variants
Screwdriver bit socket 1/2" XZN M14 - GEDORE INX 19 14 - 1888943 Acc. to DIN 2324 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated Tip as per DIN 2325 (*) not standardised
From €20.04*
10
Variants
Screwdriver bit socket 1/2", long TORX T70 - GEDORE ITX 19 L T70-100 - 6105180 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
From €20.74*
17
Variants
Socket 1/2", long 10 mm - GEDORE 19 L 10 - 1718738 Acc. to DIN 3124, ISO 2725-1 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip GEDORE vanadium steel 31CrV3, polished, chrome-plated
From €21.44*
16
Variants
Socket 1/2", long 13 mm - GEDORE D 19 L 13 - 6140170 Acc. to DIN 3124, ISO 2725-1 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip GEDORE vanadium steel 31CrV3, polished, chrome-plated Sizes 16, 18, 21 mm with hole drilled for tommy bar Ø 8 mm
From €21.44*
9
Variants
Screwdriver bit socket 1/2" TORX w/pilot T20 - GEDORE ITX 19 B T20 - 6192720 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, gun-metal finish TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
From €21.73*
5
Variants
Screwdriver bit socket 1/2", long XZN M14 - GEDORE INX 19 L 14-100 - 1888951 Acc. to DIN 2324 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated Tip as per DIN 2325 (*) not standardised
From €22.13*
8
Variants
Socket 1/2", long 1/2" - GEDORE D 19 L 1/2AF - 6141300 Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove Hand-operated, knurled grip GEDORE vanadium steel 31CrV3, polished, chrome-plated
From €28.66*