Thread Workings

Bolt extractor size 1 M3-M6 - GEDORE 8551 1 - 6758490 Made from chrome-vanadium steel, 35 HRC Operation: Drill a central hole into the broken bolt (see table) Turn the bolt extractor to the left into this hole until it grips and removes the bolt (penetrating oil may be necessary!) Always choose the largest possible extractor size

Bolt extractor size 1 M3-M6 - GEDORE 8551 S 1 - 2659352 For removing broken screws, bolts and tube ends Made from high-grade chrome-vanadium steel, tempered, 54-56 HRC Lower unscrewing torques thanks to the revised cross-section geometry Reduced drilling depth thanks to an optimised thread length Greater safety for user and component alike Larger application range, time-saving

Bolt extractor set 5 pcs M3-M18 - GEDORE 8551-55 - 6759620 Made from chrome-vanadium steel, 35 HRC In plastic case Contents: 1x Bolt extractor size 1 M3-M6 8551 1 GEDORE 8551 1 (6758490) 1x Bolt extractor size 2 M6-M8 8551 2 GEDORE 8551 2 (6758570) 1x Bolt extractor size 3 M8-M11 8551 3 GEDORE 8551 3 (6758650) 1x Bolt extractor size 4 M11-M14 8551 4 GEDORE 8551 4 (6758730) 1x Bolt extractor size 5 M14-M18 8551 5 GEDORE 8551 5 (6758810)

Bolt extractor set 5 pcs M3-M18 - GEDORE 8551 S-005 - 2659336 For removing broken screws, bolts and tube ends Made from high-grade chrome-vanadium steel, tempered, 54-56 HRC

Thread file inch - GEDORE 140 A - 6409720 For repairing damaged internal and external threads Chrome-vanadium steel, ISO-nickel-plated

Thread file metric - GEDORE 140 - 6409640 For repairing damaged internal and external threads Chrome-vanadium steel, ISO-nickel-plated

Thread file Whitworth - GEDORE 140 W - 6409800 For repairing damaged internal and external threads Chrome-vanadium steel, ISO-nickel-plated

Tap wrench with ratchet size 3, M13-M20 - GEDORE 8551 TG-3 - 2659468 To operate bolt extractors (no. 8551 and 8551 S) in confined spaces Reversible for clockwise or counterclockwise operation Sliding T-handle With two-jaw chuck to hold square shanks All steel version, chrome-plated

Screw extractor set - GEDORE 8552-025 - 6755550 For extracting broken screws and bolts with threads M5 - M16 In handy plastic case, with twist drills, guide sleeves, extractor pins and extractor nuts Dimensions: 200 x 120 x 38 mm

Tap and die set M3-M6 - GEDORE 8553 - 1939068 In plastic case Dimensions: 275 x 150 x 42 mm For internal threads M3 - M6 For external threads M3 - M6, max. 40 mm long Ratchet drive system with extension unit Additional guide sleeve for dies to ensure accurately aligned thread cutting along the bar axis, with swarf collector Drives: Ratchet with extension Taps: Quick-clamp tap wrench with M3-M6 taps Dies: Die handle with guide disc and M3-M6 dies Accessories: Fixing screws and angle screwdriver Contents: 1x Ratchet with T-handle 1/4" 140 mm 2093 U-3 T