Sets of screwdrivers

GEDORE R38002006 2K screwdriver set PH+SL 6 -piece Acc. to DIN 5264 and DIN 8764, Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up

GEDORE R38002106 2K screwdriver set PZ+SL 6 -piece Acc. to DIN 5264 and DIN 8764, Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up

GEDORE R38005906 2K electronic screwdriver set PH+SL 6 -piece 2C-handles, ergonomically formed, with quick-turning end caps, Screwdriver blades of chrome-molybdenum steel, chrome-plated

GEDORE 2150-2160 PZ-06 3K screwdriver set 6 pieces IS 4-8 PZ 1-2 Practical set composition in environmentally-friendly cardboard box, For slotted and cross-head screws PZ, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel

GEDORE R38402006 2K screwdriver set T10-40 6 -piece Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up

GEDORE 2163 TXB-05 3K screwdriver set 5 pieces TX pin T10-T30 Practical set composition in environmentally-friendly cardboard box, For recessed TX head screws with pilot, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel

GEDORE R38672006 2K T-handle screwdriver set hexagon 2.5-8 mm Two-way profile, 2-component-handle for a hands-friendly transfer of force, Blade of chrome-vanadium steel, Matt chrome-plated

GEDORE 2160 PHZ-06 3K screwdriver set 6 pieces PH+PZ 0-1-2 Practical set composition in environmentally-friendly cardboard box, For cross-head screws PH and PZ, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel

GEDORE R38002012 Screwdriver set PH+PZ+LS 2K 12 -piece Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up

GEDORE SK 2154 PH-06 3K screwdriver set with striking cap 6 -piece Practical set composition in environmentally-friendly cardboard box, For tight-fitting slotted and Phillips screws PH, Hexagon blade with additional hexagon bolster, 3-component Power-Grip³ handle with impact cap, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Blade of galvanised molybdenum-vanadium steel

GEDORE 2142 TX-007 Screwdriver set 7-piece TX T-handle screwdriver for out-of-the-ordinary screw-tightening where considerable force is needed, Popular sizes for recessed TX screws T10 T15 T20 T25 T27 T30 T40, Effort-saving work thanks to ergonomic 2-component T-handles with hanging hole, Chrome-vanadium steel, blade chrome-plated, tip burnished

GEDORE VDE 2162-2172 PZ-06 VDE Screwdriver Set SLIM DRIVE 6-teilig Practical set composition in environmentally-friendly cardboard box, For slotted and cross-head screws PZ, Ultra-small blade diameter yet with full mechanical and electrical safety, No problems in reaching screws deeply embedded in screw shafts, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel .vde-info {margin-top: 30px;} .vde-info-row {display: flex; align-items: flex-start; gap: 5mm; margin-bottom: 20px;} .vde-info-icon {display: block; width: 75px; height: 75px; flex: 0 0 75px; object-fit: contain;} .vde-info-list {margin: 0; padding-left: 20px;} The double-triangle symbol indicates that the tool has been individually tested Individually tested at 10,000 V AC (alternating voltage) based on EN 60900/IEC 60900 Insulated up to 1,000 V in accordance with EN 60900/IEC 60900 Safe working under electrical voltage Up to 1,000 V AC (alternating voltage) Up to 1,500 V DC (direct voltage) Testing carried out by the VDE Testing Institute Tested by the VDE Testing Institute for compliance with the requirements relevant to the certification mark Tools meet the requirements of the German equipment safety law GS = safety certified Tool complies with the German Product Safety Act (ProdSG), as verified by an approved testing and certification body What should I consider when using VDE insulated tools? ⚠️ Inspect VDE tools before every use! VDE insulated tools should always be checked for visible damage to the insulation before use. Cracks, cuts, excessive wear or a visible inner insulation layer indicate that the tool is no longer suitable for working on live electrical systems. If the insulation is damaged, the VDE tool must not be used for live working. ⚠️ VDE tools are no substitute for safe and professional working practices! Even high-quality insulated tools do not automatically make work on electrical installations safe. Appropriate technical qualifications, the correct working methods, suitable personal protective equipment (PPE) and compliance with all applicable safety regulations are equally important. Working on live electrical systems involves particular hazards and must only be carried out by appropriately qualified persons and under the prescribed conditions.

GEDORE VDE 2162-2172 PM-06 VDE Screwdriver Set SLIM DRIVE 6-teilig Practical set composition in environmentally-friendly cardboard box, For slotted, cross-head PH and plus-minus screws, Ultra-small blade diameter yet with full mechanical and electrical safety, No problems in reaching screws deeply embedded in screw shafts, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel .vde-info {margin-top: 30px;} .vde-info-row {display: flex; align-items: flex-start; gap: 5mm; margin-bottom: 20px;} .vde-info-icon {display: block; width: 75px; height: 75px; flex: 0 0 75px; object-fit: contain;} .vde-info-list {margin: 0; padding-left: 20px;} The double-triangle symbol indicates that the tool has been individually tested Individually tested at 10,000 V AC (alternating voltage) based on EN 60900/IEC 60900 Insulated up to 1,000 V in accordance with EN 60900/IEC 60900 Safe working under electrical voltage Up to 1,000 V AC (alternating voltage) Up to 1,500 V DC (direct voltage) Testing carried out by the VDE Testing Institute Tested by the VDE Testing Institute for compliance with the requirements relevant to the certification mark Tools meet the requirements of the German equipment safety law GS = safety certified Tool complies with the German Product Safety Act (ProdSG), as verified by an approved testing and certification body What should I consider when using VDE insulated tools? ⚠️ Inspect VDE tools before every use! VDE insulated tools should always be checked for visible damage to the insulation before use. Cracks, cuts, excessive wear or a visible inner insulation layer indicate that the tool is no longer suitable for working on live electrical systems. If the insulation is damaged, the VDE tool must not be used for live working. ⚠️ VDE tools are no substitute for safe and professional working practices! Even high-quality insulated tools do not automatically make work on electrical installations safe. Appropriate technical qualifications, the correct working methods, suitable personal protective equipment (PPE) and compliance with all applicable safety regulations are equally important. Working on live electrical systems involves particular hazards and must only be carried out by appropriately qualified persons and under the prescribed conditions.

GEDORE 2142 T-008 Hex screwdriver set 8 -piece T-handle screwdriver for out-of-the-ordinary screw-tightening where considerable force is needed, Popular sizes for in-hex screws 2 2.5 3 4 5 6 8 10, Effort-saving work thanks to ergonomic 2-component T-handles with hanging hole, Chrome-vanadium steel, blade chrome-plated, tip burnished

GEDORE DT 2142-008 Angle Screwdriver Set 8 -piece For in-hex screws, With two hexagons, same size each end, Long blade with ball end, 2K T-handle with suspension hole, Vanadium steel 61CrSiV5, chromated