Manual pipe benders

GEDORE 278500 Hand pipe bender set 3-10 mm Sizes from 3 to 10 mm Ø to 180°, For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 0.75 - 1.0 mm wall thicknesse as well as bendable stainless steel pipes with 1.0 mm wall thicknesses, With 5 aluminium bending formers for pipes with Ø 3-4, 5, 6, 8 and 10 mm, For clamping in a vice or useable as bending pliers

GEDORE 1101-278501 Hand pipe bender set 3-10mm in i-BOXX 72 Sizes from 3 to 10 mm Ø to 180°, For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 0.75 - 1.0 mm wall thicknesse as well as bendable stainless steel pipes with 1.0 mm wall thicknesses, With 5 aluminium bending formers for pipes with Ø 3-4, 5, 6, 8 and 10 mm, For clamping in a vice or useable as bending pliers, With pipe cutter No. 231011 and pipe deburring reamer No. 232501, Delivery in GEDORE L-BOXX® 72 No. 1101 L, Dimensions: W 367 x D 316 x H 72 mm

GEDORE 278600 Hand pipe bender set 6-18 mm Sizes from 6 to 18 mm Ø to 180°, Use: Precision steel pipes EN 10305-3 (DIN 2394), Hydraulic pipes EN 10305-1 (DIN 2391) with 1.0 - 2.0 mm wall thicknesses, Composite pipes up to 16 mm, Bendable stainless steel tubes with wall thicknesses from 1.0 - 1.5 mm, With 8 bending forms made of high-strength aluminum for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18 mm, For clamping in a vice

GEDORE 1100-278601 Hand pipe bender set 6-18mm in L-BOXX 136 Sizes from 6 to 18 mm Ø to 180°, Use: Precision steel pipes EN 10305-3 (DIN 2394), Hydraulic pipes EN 10305-1 (DIN 2391) with 1.0 - 2.0 mm wall thicknesses, Composite pipes up to 16 mm, Bendable stainless steel tubes with wall thicknesses from 1.0 - 1.5 mm, For clamping in a vice or in combination with tripod No. 268500 for stationary use, With 8 bending forms made of high-strength aluminum for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18 mm, With pipe cutter No. 2180 3, In GEDORE L-BOXX® 136 No. 1100 L, Dimensions: W 442 x D 357 x H 151 mm

GEDORE 278700 Hand pipe bender set 20-25 mm Sizes from 20 to 25 mm Ø to 180°, For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 1.5 - 2.5 mm wall thicknesses, composite pipes up to 25 mm as well as bendable stainless steel pipes with 1.5 - 2.0 mm wall thicknesses, For clamping in a vice, With 3 aluminium bending formers for pipes with Ø 20, 22, 25 mm, Painted blue, with black plastic handle

GEDORE 245610 Hand pipe bender set, hydraulic 8 -piece Sizes from 10 to 22 mm Ø to 90°, For soft copper pipes EN 1057 up to 22 mm (also heat-insulated), composite pipes up to 20 mm as well as precision steel pipes EN 10305-3 (DIN 2394) up to 18 x 1.5 mm, With 7 bending formers for pipes with Ø 10, 12, 14, 15, 18, 20 and 22 mm and corresponding counter-supports, Hydraulic drive without great effort, In plastic case No. 245590

GEDORE 1100-278801 Hand pipe bender set 3-18 mm in L-BOXX 136 Sizes from 3 to 18 mm to 180°, Use: Precision steel pipes EN 10305-3 (DIN 2394), Hydraulic pipes EN 10305-1 (DIN 2391) with 0.75 - 2.0 mm wall thicknesses, Composite pipes up to 16 mm, Bendable stainless steel tubes with wall thicknesses from 1.0 - 1.5 mm, With 10 aluminium bending formers for pipes with Ø 3-4, 5, 6, 8, 10, 12, 14, 15, 16 and 18 mm, For clamping in a vice, Can be used as bending pliers up to size 10 mm, As from sizes 12 mm also for stationary use with tripod No. 268500, With pipe cutter No. 2180 3, In GEDORE L-BOXX® 136 No. 1100 L, Dimensions: W 442 x D 357 x H 151 mm

GEDORE 245611 Hand pipe bender set, hydraulic 11 -piece Dimensions from 6 to 22 mm Ø to 90°, For soft copper pipes EN 1057 up to 22 mm (also heat-insulated), multi-layer composite pipes up to 20 mm, precision steel pipes EN 10305-3 (DIN 2394) up to 18 x 2 mm and annealed stainless steel pipes up to 18 x 1.2 mm, With 10 bending moulds for tubes with Ø 6, 8, 10, 12, 14, 15, 16, 18, 20 and 22 mm and corresponding counter holders, Hydraulic drive without great effort, In plastic box No. 245690

GEDORE 1100-243100 Hand pipe bender set 6-15mm in L-BOXX 136 Sizes from 6 to 15 mm Ø to 180°, For soft copper pipes EN 1057 (also with fixed coating), For clamping in a vice or useable as bending pliers, Power-saving due to free selectable initial bending angle, Especially easy bending by ratchet movement with reversible ratchet 1/2" in long version, Painted blue, In GEDORE L-BOXX® 136 No. 1100 L, Dimensions: W 442 x D 357 x H 151 mm

GEDORE 1100-245681 Hand pipe bender set, hydraulic 6-22 mm in L-BOXX Dimensions from 6 to 22 mm Ø to 90°, Soft copper tubes EN 1057 up to 22 mm (also heat insulated), Composite pipes up to 20 mm, Precision steel tubes EN 10305-3 (DIN 2394) up to 18 x 2 mm, Annealed stainless steel tubes up to 18 x 1.2 mm, With 10 bending moulds for tubes with Ø 6, 8, 10, 12, 14, 15, 16, 18, 20 and 22 mm and corresponding counter holders, Hydraulic drive without great effort, In GEDORE L-BOXX® 136 No. 1100 L, Dimensions: W 442 x D 357 x H 151 mm