Automotive

GEDORE KL-0580-22 Pump wheel puller For fixing the injection pump wheel during removal of the injection pump.

GEDORE KL-1380-234 A Puller, crankshaft pulley, PSA For pulling off the crankshaft pulley.

GEDORE 1.68/1 Steering wheel puller 120 mm With one pull ring each in 100 and 150 mm diameter for steering wheels with 3 or 4 spokes, The pull rings are provided with sliding rubber sleeves to protect the steering wheel

GEDORE 1.64/1 Drive shaft remover 100-155 mm Suitable for drive shafts with 4 or 5 apertures, For wheel stud circles 100-155 mm with 6 mm screws, For tapped holes up to max. M14, Operation: The puller is attached to the drive shaft flange using the nuts of the wheel bolts. By striking the spindle head with the sliding hammer, the shaft may be removed easily and without damage.

GEDORE KL-0369-305 A Extraction tool for glow plug Required when boring out glow plugs, to pull out the glow element on the cylinder head.

GEDORE 1.62/8 Wheel hub puller with 8 hooks For wheel stud circles from 150 up to 350 mm, With wheel stud protection using rotating nut apertures that always lie flat to the hub for Ø 22 mm and suitable reduction bushing Ø 14 and 18 mm, This tool may also be used with the hydraulic aid Nr. 1.50 without requiring a reduction bushing, Upgradeable with hydraulic spindle No. 1.06/HSP3, No. 1.61/H = Spare hook

GEDORE 1.37/2 Cylinder Sleeve Puller Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller, Operation: The spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block, By turning the spindle, all three jaws quickly and easily spread tightly under the edge of the bushing due to the novel spreading systew. Then tighten the nut of the counter support

GEDORE KL-0165-3 KA Ball joint separator set (6 forks) For removing ball joint connections on axle and steering systems. Advantage: • Variable due to exchangeable forks, • High stability, • Ideal release pressure point and adjustable tilting adjustment

GEDORE KL-0165-1 Ball joint separator set, size 1 + 2 For removing ball joint connections on axle and steering systems. Advantages: • Variable due to exchangeable forks, • High stability, • Ideal release pressure point and adjustable tilting adjustment