Puller (hydraulic)

GEDORE 1.15/4-HSP1 Hydraulic puller, 3-arm 280x310 mm Tried and tested, particularly strong design for removing discs, wheels, ball bearings etc. With technical and economical benefits due to the variable clamping reach and automatic grip of the legs, Particularly suitable for pulling off V-belt pulleys and flywheels which are mounted on longer shafts, With the hydraulic spindle, a controlled and safe pulling action is possible at all times, Also available with standard spindle - Model 1.15

GEDORE 1.17/2-HSP3 Puller with extra slim hooks 450x310 mm Very strong, Especially suitable for industry and for heavy agricultural and construction machinery, The legs grip automatically, With the hydraulic spindle, a controlled and safe pulling action is possible at all times, Also available with standard spindle - Model 1.17

GEDORE 1.06/40 Puller for slide hammer 1.50, 520x200 mm For the fast and damage-free removal of pulleys, wheels, ball bearings, etc. Robust pattern, designed for rigidity and heavy duty use, Can be used as external and internal puller by repositioning the legs, The reach may be increased both by using pulling legs in special lengths, and by using extensions

GEDORE 1.17/10 Puller for slide hammer 1.50, 300x300 mm Heavy-duty pattern for the removal of gear wheels, spoked wheels, pulleys, etc. The legs grip automatically, Can be used as 2- and 3-arm puller

GEDORE 1.50/1 Hydraulic hand pump Complete with 1.50 m high-pressure hose, To fit hydraulic cylinder 1.51, Incl. fitting and dust cover, Simple oil filling, can be used directly

GEDORE 1.50/11 Hydraulic work device, 10 t lifting height 200 mm Suitable for pressing, straightening, lifting, bending, and pulling, Consisting of hand pump No. 1.50/1 and hydraulic cylinder No. 1.51, Simple oil filling, can be used directly

GEDORE 1.55/2 Hydraulic press 15 to By using the hydraulic press, the performance of the normal pressure spindle is considerably increased, Operation: With pressure released, the press is placed between the pressure spindle and the end of the shaft. The pressure spindle is then tightened firmly. Care must be taken that the centreline of the shaft, the hydraulic press, and the pressure spindle are exactly in alignment. Then the hydraulic spindle is screwed inwards. Important: Release the hydraulic press after use

GEDORE 5.10 Safety film size 1 With pull-off forces of up to 18 t, these PVC safety films offer maximum protection through active safety against suddenly shearing ball bearings, drive pinions or small components. The films are highly flexible and can therefore be used in all situations, Dimensions: 510 x 915 mm, Double-layer welded = double safety (thickness of 0.5 mm = 1.0 mm), Tear strength: longitudinal 23 N/mm² - lateral 21 N/mm², 2 straps for variable adjustment, Press stud fasteners for added safety, no flapping ends, UV resistant, Resistant to temperatures from -25 °C to +50 °C, Storage in the supplied carry bag guarantees long service life