Sets of pullers

GEDORE 1.07/K-1A-B Puller set in CT module 140x100 mm In plastic case, Contents: 2 spindles, one 2- and 3-armed crossbar and 3 all-steel hooks with hook brake, Prevents unintentional leg slipping. The leg can be slid along the cross-beam at the push of a button, Can be used as external and internal puller by repositioning the legs, Second spindle saves working time

GEDORE 1.34/10 Internal puller set, 5 -piece For close-fitting ball bearings, rings, bushings and Simmerrings®, Titanium-nitrided surface, Multiple wrench size (11 + 13 mm), M10 connecting thread, Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace is then added. Both feet must be aligned parallel to the spindle to ensure rigidity, In robust plastic case, 275 x 229 x 83 mm

GEDORE 1.07/K-1-SE 200 S Puller set with 3 hooks 90x100/200 mm In plastic case, The forged hooked feet are particularly suitable for difficult-to-access places, Quick release legs for fast, easy set-up and adjustment, Contents: 2 spindles, 1 cross-beam each 2- and 3-arm pattern thin quick-grip pulling legs of the 100 and 200 mm clamping depths, Clamping depth 100 mm = hook foot thickness (e) 3.7 mm, max. 2.5 t, Clamping depth 200 mm = hook foot thickness (e) 2.0 mm, max. 2.0 t

GEDORE 1101 CT-1.31/0-H Internal puller set in CT module Internal extractor set with counter support & slide hammer, For pulling components such as ball bearings and bushings located inside the housing. System compatible: MIXX & CLICK and Sortimo vehicle equipment, Flexible use due to counter support or slide hammer, Set completely embedded in a stackable Check-Tool insert, In GEDORE i-BOXX® 72 No. 1101 L (W x D x H: 340 x 260 x 60 mm), Check-Tool insert usable in drawers with minimum dimensions of 340 x 260 x 60 mm, Check-Tool insert + tools (without i-BOXX®): 1101 CT-1.31/0-H (Code: 3461742), Made in Germany

GEDORE 1101-1.31/0-H Internal puller set Internal extractor set with counter support & slide hammer, For extracting components located in the housing, such as ball bearings, bushings, etc. Made in Germany, Flexible use due to counter support or slide hammer, With Check-Tool insert for quick check of tool completeness, Insert can be used in drawers with minimum dimensions 340 x 260 x 60 mm, Tools completely recessed in the foam, thus the equipped insert is stackable, In GEDORE i-BOXX® 72 No. 1101 L

GEDORE 1.04/HP2A-B-HSP1-S High power with hydraulic + protection Cross-beam especially hardened and tempered allows safe application of extremely high pulling forces and doubles the tensile force capability, Strong drop forged pattern, Puller hook forged from one piece, With hook brake - safety device against unintentional slipping of the hooks, The hook can be moved on the crosshead at the push of a button, Can be used as external and internal puller by repositioning the legs, Adjustment scale for even adjustment of the puller hooks, Allows centric and force-optimized pull-off even at highest pull-off forces, Grease hydraulics for controlled and force-saving pull-off, Incl. protective foil

GEDORE 1.04/ST Universal Puller Set with Stand Consisting of 3 pullers in different sizes, Strong drop forged pattern, Due to the bending-moment reinforcement on its back face, the energy-saving design of the cross-beam means even stronger and safer pulling work, Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required, The quick-action adjustment feature supports the energy-saving and fast operation, Exchangeable spindle tip (ball or tip), Upgradeable with hydraulic spindle (see table)

GEDORE 1.04/ST-HP-B Universal Puller Set with Stand Consisting of 3 pullers in different sizes, Cross-beam especially hardened and tempered allows safe application of extremely high pulling forces and doubles the tensile force capability, Strong drop forged pattern, Puller hook forged from one piece, With leg brake - prevents unintentional leg slipping. The leg can be slid along the cross-beam at the push of a button, Can be used as external and internal puller by repositioning the legs, Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required, Can be retrofitted with hydraulic spindle

GEDORE 1.06/ST-E Puller set in 1/3 ES module 1.06/E , with Workshop Stand Consisting of 5 pullers in different sizes with standard or quick-release pulling hook or all-steel hook with hook brake, Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required, For clamping depths up to Ø 250 mm external, Ø 330 mm internal, and clamping reach up to 200 mm

GEDORE 1.06/ST Puller set in 1/3 ES module 1.06 , with Workshop Stand Consisting of 5 pullers in different sizes with standard or quick-release pulling hook or all-steel hook with hook brake, Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required, For clamping depths up to Ø 250 mm external, Ø 330 mm internal, and clamping reach up to 200 mm

GEDORE 1100-CT-1.31/2 Internal puller set in CT module Internal puller set with 8 internal pullers & 2 counter supports, L-BOXX® for mobile and stationary use, System compatible: MIXX & CLICK and Sortimo vehicle equipment, Set completely embedded in a stackable Check-Tool insert, L-BOXX® made of impact- and shock-resistant ABS plastic, Check-Tool insert usable in drawers with minimum dimensions of 400 x 310 x 90 mm, Check-Tool insert + tools (without L-BOXX®): 1100 CT-1.31/2 (Code: 3461785), All components available as spare parts, Made in Germany

GEDORE 1100-1.31/2 Internal puller set in L-BOXX Internal extractor set consisting of internal extractors & counter supports, Storage box made of impact and shock resistant ABS plastic, In the L-BOXX® mobile, as well as stationary usable, System compatible -> Mixx&Click and Sortimo in-vehicle equipment, With Check-Tool insert for quick check of tools, Tools completely recessed in the foam, thus the equipped insert is stackable, Insert can be used in drawers with minimum dimensions 400x310x90 mm, Made in Germany, All components available as spare parts

GEDORE 1.06/ST1-B Puller set in 1/3 ES module 1.06/B , with Workshop Stand Consisting of 5 pullers in different sizes with standard or quick-release pulling hook or all-steel hook with hook brake, Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required, For clamping depths up to Ø 250 mm external, Ø 330 mm internal, and clamping reach up to 200 mm

GEDORE 2.40 Land & construction machinery repair puller set For the assembly of the robust and handy strap-pattern pulling tools 1.14 and 1.15, With this set you can assemble ten common flexible lug pullers from the 1.14/1.15 series including the new hydraulic spindle yourself, Everything at hand on perforated wall-board

GEDORE 1.18/1.19 Puller set for crankshaft pulley PSA 12 -piece This perforated panel offers place for 12 pullers of the series 1.18 and 1.19, For clamping depths from Ø 200 mm and clamping reach up to 200 mm, Delivery includes perforated panel

GEDORE 2.30 Industrial puller set, modular system For the assembly of the tried and tested 1.06 and 1.07 versions, Using this set, you will be able to assemble 12 of the usual versions with high-speed clamping legs, including hydraulic spindle, in seconds, Everything at hand on perforated wall-board

GEDORE 2.20 Truck workshop set, modular system Clearly arranged module system, Using this set, you will be able to assemble 12 of the usual versions with hydraulic spindle, in seconds, 2-armed cross beam with adjustment scale for even adjustment of the puller hooks. Allows centric and force-optimized pulling even with highest pulling forces, Everything at hand on perforated wall-board

GEDORE 2.50 Internal and external puller set Suitable for various applications of external or internal extraction, Internal extractor for drill holes with Ø 5 - 55 mm. To be used with slide hammer or counter support, External pullers with various spans up to 130 mm for the most diverse pulling problems, Pulling and separating devices including extensions, ideal for pulling off tightly fitted or thin-walled parts for outside diameters 5 - 115 mm, Everything at hand on perforated wall-board