Clamping screw tool sets

GEDORE KL-0250-40 Extractor for clamping screw Audi A4 / VW Passat For a professional and quick unscrewing of the upper clamping screw and both pivot pins from the steering knuckle if these are rusty. The tool can be used for the left and the right wheel suspension. The method with hammer, welding torch, angle grinder and mandrel is not only very time-consuming and exhausting but there is also a risk of damaging the steering knuckles, pivot pins and wishbone braces. Advantages: • High cost savings. • High time savings approx. 2 to 3 hours. • The axle parts are not damaged.

GEDORE KL-0250-43 KB Clamping screw drilling tool set VW-Audi The boring tool set enables the quick and professional removal by boring of extremely tight clamping screws (with spanner size 16 mm) on multi-link axles. Required, for example, when changing the upper or lower suspension arms and the tie bar end. This avoids a costly replacement of the entire steering knuckle with the wheel bearing unit. To avoid damage to the mudguard on vehicles with a bottom-mounted steering gear, the steering knuckle can be pre-tensioned to full lock with the help of the compressing device included in the scope of delivery.