Tool assortments - not grouped

GEDORE VDE S 8321 H VDE Tool Set 4 -piece Practical set composition, VDE 8314-160 H insulated side cutter with slim head (160 mm ), VDE 8131-AB insulated, angled multiple pliers for cutting, stripping, crimping and holding (200mm), VDE 2172 insulated slim drive screwdriver for slotted screws 3.5 mm, VDE 2162 insulated slim drive screwdriver for PH 2

GEDORE S 1100 W-001 Pliers/Screwdriver Assortment for Tool Card

GEDORE R21000072 Tool Set BASIC Loose 72 -piece Multifunction saw: Rotating saw blade and frame, hand protector, 2-component-handle, delivered with HSS bi-metal saw blade (24 tpi), Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap, Double open-ended spanners: Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102, jaw set at 15°, matt satin chrome-plated finish, chrome-vanadium steel, Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge, Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, 2-component-handle, chrome-vanadium steel, Pliers: design in accordance with DIN ISO 9243, head ground, inductively hardened cutting edges, dipped handles, forged, Rolling tape measure: ABS 2-component housing, with clip, nylon-coated measuring tape, mm graduation, with tape retractor and tape lock, with magnetic stop, accuracy class II, Construction pencil: Oval shape, 2K Screwdrivers: Slotted and Pozidriv (PZ) screwdrivers, designed according to DIN and VDE standards. Slotted and Phillips (PH) screwdrivers, VDE-insulated according to DIN EN 60900, blade made of high-quality chrome-molybdenum steel, chrome-plated, drive tip phosphated, 2-component handle, 5-sided handle head, elongated hole in the handle. Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder, Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel, Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, Chrome-vanadium steel, powder-coated, Phase tester: Max. 250 volts, black burnished tip, red plastic cover, anti-slip protection on the handle, plastic clip, design according to DIN 0680-6:1977-04, VDE Cable knife: VDE-insulated to DIN EN 60900, strong straight blade, straight cutting edge, protective cap, 2-component-handle, hands-friendly transfer of force, Half-round file: To DIN 7261, 2-component-handle, hands-friendly transfer of force, hole for hanging up, Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener, Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated, Bit box: Drive adaptor with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box, Bit screwdriver: 2-component-handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

GEDORE R21000059 Tool Set ALLROUND Loose 59 -piece Combination wrench: design according to DIN 3113, Form A, ISO 3318, ISO 7738, ring side angled 15°, jaw position 15°, surface matt satin chrome-plated, chrome-vanadium steel, Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge, Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged, 2C screwdriver: Slot and cross-slotted PH, PZ , to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle, Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder, Flat and cross-cut chisel: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel, Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel, 8-edge punch: Design according to DIN 7250, impact end tempered, chrome-vanadium steel, Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, Chrome-vanadium steel, powder-coated, Phase tester: Max. 250 volts, black burnished tip, red plastic cover, anti-slip protection on the handle, plastic clip, design according to DIN 0680-6:1977-04, Round and flat files: To DIN 7261, 2-component-handle, hands-friendly transfer of force, hole for hanging up, Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated, Wood sectioned folding ruler: Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints, Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip

GEDORE R21000042 Tool Set ELECTRICAL TECHNOLOGY Loose 42 -piece Double open-ended spanners: Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102, jaw set at 15°, matt satin chrome-plated finish, chrome-vanadium steel, VDE Combination pliers: To DIN ISO 5746, meets requirements of VDE 0682 Part 201 and EN/EC 60900, with gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, VDE power side cutter: To DIN ISO 5749, meets requirements of VDE 0682 Part 201 and EN/EC 60900 high cutting performance, slim head form, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, VDE Flat Nose Pliers, angled: Design to DIN ISO 5745, meets requirements of VDE 0682 part 201 and EN/IEC 60900, 45° angled gripping surfaces, serrated lengthwise, induction-hardened, long cutting edges, 2-component handle, forged, VDE cable knife: VDE insulated according to DIN EN 60900, with stable, partially insulated and replaceable blade, straight cutting edge, with protective cap, safety handle made of impact-resistant plastic, VDE screwdriver slotted and cross-slotted PH, VDE-insulated in acc. with DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle, Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder, Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge, Club hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 6475, ash handle, paint-coated shaft end, ring wedge, Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel, Electrician's chisel, square: cutting edge and head ground, tempered impact end, Chrome-vanadium steel, Pointed chisel, 8-point: Designed according to DIN 7256, cutting edge and head ground, impact end tempered, Chrome-vanadium steel, 8-edge punch: Design according to DIN 7250, impact end tempered, chrome-vanadium steel, Phase tester: Max. 250 volts, black burnished tip, red plastic cover, anti-slip protection on the handle, plastic clip, design according to DIN 0680-6:1977-04, Wood sectioned folding ruler: Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints, Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip, Voltage tester: To DIN ISO 0680, 8 LED displays, DC and AC measurement, Protection classification IP65, Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap, Scraper: For minor improvements/repairs, wooden handle, with hanging-up hole, Construction pencil: Oval shape

GEDORE R21000057 Tool Set SCREWDRIVER Loose 57 -piece Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device, Square drive as per DIN 3120, ISO 1174, with ball retention groove, 2C reversible ratchet: lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets, Socket, hex, metric, short, as per DIN 3124, ISO 2725, Spark plug socket 1/2" with pressed-in holding rubber, Spark plug insert 1/2" with pressed-in retaining rubber and additional drive hexagon SW 24, Socket extension 1/2", Universal joint 1/2”, screwed-on joint , acc. to DIN 3123 - C 12,5, For hand-operated screw work, Chrome-vanadium steel, matt satin chrome-plated, Socket strip for fitting with insert holders for 1/2" sockets, aluminium, Combination wrench: Design according to DIN 3113, Form A, ISO 3318, ISO 7738, ring side angled 15°, jaw position 15°, surface matt satin chrome-plated, chrome-vanadium steel, Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge, Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged, 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle, Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder, Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, Chrome-vanadium steel, powder-coated, Phase tester: Max. 250 volt, 1-component handle, transparent plastic, metal clip, Rolling tape measure: ABS 2-component housing, with clip, nylon-coated measuring tape, mm graduation, with tape retractor and tape lock, with magnetic stop, accuracy class II

GEDORE R21000108 Tool Set ALL-IN Loose 108 -piece Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device, Square drive as per DIN 3120, ISO 1174, with ball retention groove, 2C reversible ratchet 1/4" + 1/2": lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets, Socket, hex, metric, short, as per DIN 3124, ISO 2725, Socket wrench extension, Cardan joint: joint screwed, design in accordance with DIN 3123 - C 12.5, For hand-operated screw work, Chrome-vanadium steel, matt satin chrome-plated, Socket strip for fitting with insert holders for 1/2" sockets, aluminium, Ratchet wrench, metric: Following DIN 3113, ISO 3318, straight form, jaw position 15°, surface satin matt chrome plated, Chrome-vanadium steel, Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge, Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, 2-component-handle, chrome-vanadium steel, Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, Tape measure: ABS 2-component housing, with clip, nylon-coated tape measure, mm division, with tape feed and tape lock, with magnetic Stop, accuracy class II, 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle, Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder, Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel, Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, Chrome-vanadium steel, powder-coated, Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel, 8-edge punch: Design according to DIN 7250, impact end tempered, chrome-vanadium steel, Octagonal split pin driver: Design according to DIN 6450, impact end tempered, chrome-vanadium steel, Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener, Bit box: Drive adaptor with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box, Bit screwdriver: 2-component-handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

GEDORE S 1151 Tool Assortment 57-piece MM For workshops and service stations, Recommended hook assortment No. 1500 HS-1151 (50-pieces), Tools in metric dimensions, Also available in tool box or on tool boards

GEDORE S 1151 A Tool Assortment 67-piece INCH For workshops and service stations, Recommended hook assortment No. 1500 HS-1151 A (52-pieces), Tools in inch sizes, Also available in tool box

GEDORE S 1007 Mechanic tool assortment 180 -piece A complete tool assortment for the professional, Suitable for mounting in GEDORE tool trolley No. WSL-L7 (workster), Tools in metric dimensions