Abrasive drums

Non-woven disc drum, for use with satin finishing machines. Consistent finishing Long lifetime through high-density fill Open structure, thus less clogging Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The RHODIUS VW non-woven abrasive drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VW on any of the materials listed here. Structure and manufacture This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality The VW non-woven abrasive drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the perfect tool for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product ensures a consistent, high-quality finish. Dimension This non-woven abrasive drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits, including coarse, medium, fine, very fine and ultrafine. Industries This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Drum, for use with satin finishing machines. Fill: combination of abrasive cloth and non-woven material. Strong material abrasion with simultaneous surface finish Long lifetime through high-density fill Open structure, thus less clogging Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The RHODIUS VWK drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VWK on any of the materials listed here. Structure and manufacture The product combines abrasive cloth with a non-woven abrasive. This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality The VWK drum provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product offers high-performance material abrasion with simultaneous surface finishing. Dimension This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of FEPA grits: A60, A80 and A150, combined with the non-woven grits of coarse, medium and fine. Industries This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Abrasive flap drum, for use with satin finishing machines. Long lifetime through high-density fill Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The RHODIUS LW non-woven disc drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the RHODIUS LW when working on wood. Structure and manufacture This drum enjoys a very long lifetime thanks to its high-density coating. Quality The LW non-woven disc drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimension This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 120. Industries These products are the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Felt flap drum, for use with satin finishing machines. High-quality wool felt Long lifetime through high-density fill Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The FW felt flap drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FW on any of the materials listed here. Structure and manufacture High-quality wool felt is used for this product. This drum enjoys a very long lifetime thanks to its high-density coating. Quality The FW felt flap drum provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Always use this felt flap drum with the RHODIUS polishing paste that is perfectly matched to your working material. This ensures you achieve the best results. Dimension This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from several quality grades (flap thickness (D), felt hardness (H)): D3/H25, D3/H40, D5/H25, D5/H25. Industries This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.