Tool sets and assortments

GEDORE R22150013 Screwdriver set PH+SL 2/6 CT module 6 -piece Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up, In foam module

GEDORE R22150014 Screwdriver set PZ+SL 2/6 CT module 6 -piece Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up, In foam module

GEDORE R22150015 Screwdriver set TX 2/6 CT module 6 -piece Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up, In foam module

GEDORE R22150001 Double clutch tool set, Fiat (C635) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102, Jaw set at 15°, Matt satin chrome-plated finish, Chrome-vanadium steel, In foam module

GEDORE R21702013 Bike set for travel Ergonomic handling with bit ratchet and bit adapter, Selection of bits and sockets tailored to the screws and nuts on a bike, When space is tight: ratchet can be used with and without a bit adapter, Clampable bag on the saddle and seat post, No disturbing noises when driving thanks to the plastic zipper

GEDORE 1500 ES-2150 PH Screwdriver set in 1/3 ES module Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE R22150000 Double-ended ring wrench set, angled Acc. to DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, Thin walled rings, Chrome-vanadium steel, Matt satin chrome-plated finish, In foam module

GEDORE 1500 ES-2150 PZ Screwdriver set in 1/3 ES module Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE 1500 ES-2163 TX Screwdriver set in 1/3 ES module Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE R22150018 Pliers Set 2/6 CT Module 4 -piece Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, Chrome-vanadium steel, powder-coated, Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged, Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged, Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged, In foam module

GEDORE R22150016 VDE Screwdriver Set 2/6 CT Module 6 -piece For slotted head screws: Acc. to DIN 5264, DIN ISO 2380, For cross-head screws PH: Acc. to DIN 7438, DIN ISO 8764, VDE-insulated acc. to DIN EN 60900, Guaranteed protection for working under voltage up to AC 1000 V (alternating current) and DC 1500 V (direct current), Blade of high-grade chrome-molybdenum steel, Driven tip phosphated, corrosion-protected and low-wear, 2-component-handle for a hands-friendly transfer of force, Moulded handle forms a firm unit with the blade, 5-edge handle head stops it rolling off when put down, Elongated hole in the handle for hanging up, In foam module

GEDORE R22150017 Circlip pliers set 2/6 CT module 4 -piece Acc. to DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983 for shaft diameter, Acc. to DIN 5254 Form B, 90° angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983 for shaft diameter, Acc. to DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984 for shaft diameter, Acc. to DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984 for drill hole diameter, Dip-coated handle covers, Chrome-vanadium steel, In foam module

GEDORE 1500 CT1-2150 PH Screwdriver in Check-Tool module For slotted and cross-head screws PH, Blades of vanadium plus steel, matt chrome-plated, 3-component handle with hanging hole, In 1/3 Check-Tool-Module, Fast optical completeness check due to 2-coloured foam inserts, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips, Resistant to oil and grease, easy to clean

GEDORE 1500 CT1-2150 PZ Screwdriver in Check-Tool module

GEDORE 1500 CT1-2163 TX Screwdriver in Check-Tool module

GEDORE 1500 ES-VDE 2170 PZ VDE Screwdriver Set in 1/3 ES Module Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE 1500 ES-2163 TXB Screwdriver set in 1/3 ES module Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE R22150008 Socket wrench set 1/2" 2/6 CT-module 5-piece Coupler in acc. with DIN 3120, ISO 1174, with ball locking device, Square drive as per DIN 3120, ISO 1174, with ball retention groove, 2C reversible ratchet 1/2": To DIN 3120 - A 12,5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle, Socket extension 1/2", Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12,5, Chrome-vanadium steel, matt satin chrome-plated, For hand-operated screw work, In foam module

GEDORE 1500 ES-6 Double-ended open-end wrench set in 2/6 CT module, 8-piece Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE 1500 CT1-2163 TXB Screwdriver in Check-Tool module

GEDORE 1500 CT1-VDE 2170 PZ VDE Screwdriver in Check-Tool-Modul

GEDORE 1500 ES-350 Chisel assortment in 1/3 ES-Modul Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE 1500 ES-2133 Socket wrench set in 1/3 ES-module Supplied in 1500 ES modules, Made of impact-resistant ABS plastic, black grained, Oil and acid resistent, Each tool lies slip-proof in its own recess, easy to remove thanks to recessed grips

GEDORE R22150020 Socket set 3/8 1/3 CT-module 18 -piece Connecting square according to DIN 3120 - C 10, ISO 1174, with ball retention groove, Square drive as per DIN 3120 - C 10, ISO 1174, with ball retention groove, 2C-reversible ratchet 3/8": clockwise/anti-clockwise rotation can be switched using a lever, push-button release, fine-toothed, oval head, 2-component handle, Socket wrench inserts 3/8" 6-edge: metric, short, design according to DIN 3124, ISO 2725, Socket extension 3/8" 125 mm, T-handle with sliding piece 3/8": Design according to DIN 3122, ISO 3315, Adapter 3/8“ to 1/2", Chrome-vanadium steel, matt satin chrome-plated, For hand-operated screw work, In foam module