Go to homepage
Shipping country:

Machine Tap RED RING DIN 371 Form C 15° SP HSSE-PM TiALN - M 4 x 0.7

Variants
We are happy to be there for you
+49 (0) 4101 780 28 80
Contact
Article nameMachine Tap RED RING DIN 371 Form C 15° SP HSSE-PM TiALN - M 4 x 0.7
Product number:VOE36172
ManufacturerVÖLKEL
TypeRED RING
StandardDIN 371
FormForm C
Type of flute15° Spiral Flute
MaterialHSSE-PM
CoatingTiALN
Type of threadmetric ISO-thread
SizeM 4 x 0.7
Thread standardDIN 13
ToleranceISO2 (6H)
Overall length (L1)63 mm
Thread length (L2)13 mm
Shank diameter (D2)4.5 mm
Square3.4 mm
Applicationfor through and blind holes

VÖLKEL (36172) Machine Tap M 4x0.7 HSSE-PM TiALN Form C

Application:

short-chipping materials from 1200 N/mm² tensile strength

  • for through and blind holes.

For short-chipping materials from 1,200 N/mm² tensile strength and for processing difficult-to-machine, even prehardened materials of great hardness. Due to the very robust execution made of powder metallurgical HSSE-PM steel and the special profile of the flute particularly suitable for extreme applications. The TiALN coating significantly increases the surface hardness of the tap and significantly reduces a sliding friction. The short thread lead enables the machining of blind holes up to immediately before the bottom of the blind hole. Due to the spiral flute design with a twist angle of 15° chips are reliably removed from the blind hole.

Information on product safety

Manufacturer:
VÖLKEL GmbH
Morsbachtalstr. 20, 42855 Remscheid, Germany
+49 2191 490112
[email protected]