Grinding / polishing

Unitised disc for processing cramped areas and fillet welds. Degree of hardness: 3/4 medium; 6/7 hard. Optimal in fillet welds Decorative surface finish Long lifetime Shape:    Thickness:   Stainless steel   Non-ferrous metals Machine suitability:  

Unitised disc, for use with angle grinders. Degree of hardness: medium. Straight or angled design Decorative surface finish Ling lifetime Shape:    Thickness:   Stainless steel   Non-ferrous metals Machine suitability:  

Unitised disc, for use with angle grinders. Degree of hardness: medium. Straight or angled design Decorative surface finish Ling lifetime Shape:    Thickness:   Stainless steel   Non-ferrous metals Machine suitability:  

Continuous-feed belt with ceramic grain for stationary belt grinders. Bond from synthetic resin with abrasive grain fillers for cooler grinding Closed coating for high stock removal performance on steel and stainless steel Tear-resistant X-polyester fabric, waterproof for a long lifetime Quality reference:    Grain Material suitability:   Steel Machine suitability:    High-performance ceramic grain tools. For industrial high-throughput grinding applications. Machine suitability The RHODIUS ESB CX abrasive belt is a continuous-feed belt designed for use on a stationary belt grinder. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will achieve very good results on any of the materials listed here. Structure and manufacture The backing type used here is a heavy, waterproof X-weight polyester cloth. The belt is coated with a self-sharpening and especially aggressive ceramic grain. The grain features an exceptionally closed coating. The synthetic resin bond with active grinding additives (top size) keeps grinding work cool. Quality The ESB CX provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application The high-quality long belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimension The ESB CX abrasive belt for stationary belt grinders is available in many variants, and in widths from 75 mm to 150 mm as well as in a length of 2000 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 80. Industries A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.

Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. With 6 mm support High-grade wool felt FLPB with slotted flaps for optimal workpiece adaptation Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Roll with plastic core to unroll as needed. Closed coated aluminium oxide for high material abrasion Flexible cotton fabric for optimal adaptation to the workpiece Simply cut to length by hand as needed Quality reference:    Grain Material suitability:   Steel    Machine suitability This product is sold in economical long rolls: the abrasive can then be cut to length for use in manual grinding. Material suitability This high-quality RHODIUS abrasive paper has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the SPBR. Structure and manufacture The backing type used here is a flexible and soft J-weight flex cotton cloth. The abrasive paper is coated with aluminium oxide. The grain features an exceptionally closed coating. A long lifetime is ensured by the synthetic resin bonding. Quality The SPBR gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The closed aluminium oxide coating enables very high material abrasion. Dimension This product is available in rolls of 25 m and 50 m, and in the widths of 40 mm, 50 mm, 100 mm and 1150 mm. Shape: RMA 0B. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 600. Industries RHODIUS rolls can be cut to length by hand as required, and are perfectly suited to tackling the many applications and challenges faced in the machine and metalwork shop, in plant construction, plumbing, interior fit-out and renovation, as well as installation work. Not just for the pros: the KKBR also provides home improvers and DIYers with a high-quality tool that ensures they can achieve superior cleaning results.

Polishing rings for use with the matching ESD drive arbour. High-grade cloth For use on angle grinders or drills Available also as set each with a polishing ring, mandrel and 3 polishing pastes. Quality reference:    Grain Material suitability:   Steel   Drill  

Unitised disc, for use with angle grinders. Degree of hardness: medium. Straight or angled design Decorative surface finish Ling lifetime Shape:    Thickness:   Stainless steel   Non-ferrous metals Machine suitability:  

Unitised disc, for use with angle grinders. Degree of hardness: medium. Straight or angled design Decorative surface finish Ling lifetime Shape:    Thickness:   Stainless steel   Non-ferrous metals Machine suitability:  

Roll with plastic core to unroll as needed. Closed coated aluminium oxide for high material abrasion Flexible cotton fabric for optimal adaptation to the workpiece Simply cut to length by hand as needed Quality reference:    Grain Material suitability:   Steel    Machine suitability This product is sold in economical long rolls: the abrasive can then be cut to length for use in manual grinding. Material suitability This high-quality RHODIUS abrasive paper has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the SPBR. Structure and manufacture The backing type used here is a flexible and soft J-weight flex cotton cloth. The abrasive paper is coated with aluminium oxide. The grain features an exceptionally closed coating. A long lifetime is ensured by the synthetic resin bonding. Quality The SPBR gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The closed aluminium oxide coating enables very high material abrasion. Dimension This product is available in rolls of 25 m and 50 m, and in the widths of 40 mm, 50 mm, 100 mm and 1150 mm. Shape: RMA 0B. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 600. Industries RHODIUS rolls can be cut to length by hand as required, and are perfectly suited to tackling the many applications and challenges faced in the machine and metalwork shop, in plant construction, plumbing, interior fit-out and renovation, as well as installation work. Not just for the pros: the KKBR also provides home improvers and DIYers with a high-quality tool that ensures they can achieve superior cleaning results.

Polishing rings for use with the matching ESD drive arbour. High-grade cloth For use on angle grinders or drills Available also as set each with a polishing ring, mandrel and 3 polishing pastes. Quality reference:    Grain Material suitability:   Steel   Drill  

Abrasive flap wheel, for use on angle grinders. The flexible flaps facilitate optimal adaptation to the workpiece Especially high number of flaps for long lifetime Good stock removal performance Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder Machine suitability The RHODIUS SLR abrasive flap wheel can be used on an angle grinder with an M14 spindle. Material suitability This product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users will also achieve very good results on wood with the RHODIUS SLR. Structure and manufacture The flaps are arranged with great precision on this RHODIUS abrasive flap wheel. This ensures a constant and even wear pattern as well as high abrasive performance. Quality The SLR abrasive flap wheel gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap wheels from the premium TOP line are recommended. Application This quality product is the tool of choice when users need to tackle fine deburring work and preparatory work on especially hard-to-reach places, or when precise and effective grinding is required on corners or rounded workpieces. For these use cases, the flexible flaps ensure optimum adjustment to the workpiece surface. The product also shows its strengths to the full on rustproof or acid-proofed steels, Hardox and high-strength sheet metal. Dimension This flap wheel for angle grinders with an M14 spindle is available in the dimensions of 125 mm x 20 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grits ranging from 40 to 320. Industries This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. With 6 mm support High-grade wool felt FLPB with slotted flaps for optimal workpiece adaptation Quality reference:    Grain Material suitability:   Steel   Straight grinder  

Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. For use on angle polishers Processing of surfaces up to mirror finish High-grade wool felt Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder Machine suitability This felt polishing flap disc is designed for use on an angle polisher with a 22.23 mm spindle. Always use an adjustable-speed angle polisher operated at a low speed. The maximum rated speed for this product is 8,500 or 7,700 rpm (depending on diameter). Material suitability The FLS felt polishing flap disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FLS on any of the materials listed here. Structure and manufacture RHODIUS felt polishing flap discs are made from high-quality wool felt. A choice of two hardness grades is offered: H25 (soft) for high-gloss polishing and H40 (hard) for pre-polishing. Quality This felt polishing flap disc gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application With a felt polishing flap disc, you can achieve surface treatment up to a mirror finish. RHODIUS felt polishing flap discs are suitable for both pre-polishing and high-gloss polishing – use the correct polishing paste for each type of application. Important: always use a new felt polishing flap disc for each paste. Dimension This felt polishing flap disc is available in the diameters of 115 mm and 125 mm, and with a flap thickness of 5 mm. The user can also choose a felt hardness grade of H25 or H40. Industries RHODIUS felt polishing flap discs are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Non-woven disc drum, for use with satin finishing machines. Consistent finishing Long lifetime through high-density fill Open structure, thus less clogging Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The RHODIUS VW non-woven abrasive drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VW on any of the materials listed here. Structure and manufacture This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality The VW non-woven abrasive drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the perfect tool for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product ensures a consistent, high-quality finish. Dimension This non-woven abrasive drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits, including coarse, medium, fine, very fine and ultrafine. Industries This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Abrasive non-woven roll with fine, flexible fibres for a good surface finish. Flexible for optimum adjustment to the workpiece Uniform surface finish Quality reference:    Grain Material suitability:   Steel   GFRP Machine suitability:  

Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. For use on angle polishers Processing of surfaces up to mirror finish High-grade wool felt Quality reference:    Grain Material suitability:   Steel   Freehand angle grinder Machine suitability This felt polishing flap disc is designed for use on an angle polisher with a 22.23 mm spindle. Always use an adjustable-speed angle polisher operated at a low speed. The maximum rated speed for this product is 8,500 or 7,700 rpm (depending on diameter). Material suitability The FLS felt polishing flap disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FLS on any of the materials listed here. Structure and manufacture RHODIUS felt polishing flap discs are made from high-quality wool felt. A choice of two hardness grades is offered: H25 (soft) for high-gloss polishing and H40 (hard) for pre-polishing. Quality This felt polishing flap disc gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application With a felt polishing flap disc, you can achieve surface treatment up to a mirror finish. RHODIUS felt polishing flap discs are suitable for both pre-polishing and high-gloss polishing – use the correct polishing paste for each type of application. Important: always use a new felt polishing flap disc for each paste. Dimension This felt polishing flap disc is available in the diameters of 115 mm and 125 mm, and with a flap thickness of 5 mm. The user can also choose a felt hardness grade of H25 or H40. Industries RHODIUS felt polishing flap discs are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Abrasive non-woven roll with fine, flexible fibres for a good surface finish. Flexible for optimum adjustment to the workpiece Uniform surface finish Quality reference:    Grain Material suitability:   Steel   GFRP Machine suitability:  

Drum, for use with satin finishing machines. Fill: combination of abrasive cloth and non-woven material. Strong material abrasion with simultaneous surface finish Long lifetime through high-density fill Open structure, thus less clogging Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The RHODIUS VWK drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VWK on any of the materials listed here. Structure and manufacture The product combines abrasive cloth with a non-woven abrasive. This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality The VWK drum provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product offers high-performance material abrasion with simultaneous surface finishing. Dimension This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of FEPA grits: A60, A80 and A150, combined with the non-woven grits of coarse, medium and fine. Industries This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Abrasive flap drum, for use with satin finishing machines. Long lifetime through high-density fill Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The RHODIUS LW non-woven disc drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the RHODIUS LW when working on wood. Structure and manufacture This drum enjoys a very long lifetime thanks to its high-density coating. Quality The LW non-woven disc drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimension This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 120. Industries These products are the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Roll with plastic core to unroll as needed. Closed coated aluminium oxide for high material abrasion Flexible cotton fabric for optimal adaptation to the workpiece Simply cut to length by hand as needed Quality reference:    Grain Material suitability:   Steel    Machine suitability This product is sold in economical long rolls: the abrasive can then be cut to length for use in manual grinding. Material suitability This high-quality RHODIUS abrasive paper has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the SPBR. Structure and manufacture The backing type used here is a flexible and soft J-weight flex cotton cloth. The abrasive paper is coated with aluminium oxide. The grain features an exceptionally closed coating. A long lifetime is ensured by the synthetic resin bonding. Quality The SPBR gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The closed aluminium oxide coating enables very high material abrasion. Dimension This product is available in rolls of 25 m and 50 m, and in the widths of 40 mm, 50 mm, 100 mm and 1150 mm. Shape: RMA 0B. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 600. Industries RHODIUS rolls can be cut to length by hand as required, and are perfectly suited to tackling the many applications and challenges faced in the machine and metalwork shop, in plant construction, plumbing, interior fit-out and renovation, as well as installation work. Not just for the pros: the KKBR also provides home improvers and DIYers with a high-quality tool that ensures they can achieve superior cleaning results.

Roll with plastic core to unroll as needed. Closed coated aluminium oxide for high material abrasion Flexible cotton fabric for optimal adaptation to the workpiece Simply cut to length by hand as needed Quality reference:    Grain Material suitability:   Steel    Machine suitability This product is sold in economical long rolls: the abrasive can then be cut to length for use in manual grinding. Material suitability This high-quality RHODIUS abrasive paper has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the SPBR. Structure and manufacture The backing type used here is a flexible and soft J-weight flex cotton cloth. The abrasive paper is coated with aluminium oxide. The grain features an exceptionally closed coating. A long lifetime is ensured by the synthetic resin bonding. Quality The SPBR gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Application The closed aluminium oxide coating enables very high material abrasion. Dimension This product is available in rolls of 25 m and 50 m, and in the widths of 40 mm, 50 mm, 100 mm and 1150 mm. Shape: RMA 0B. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 600. Industries RHODIUS rolls can be cut to length by hand as required, and are perfectly suited to tackling the many applications and challenges faced in the machine and metalwork shop, in plant construction, plumbing, interior fit-out and renovation, as well as installation work. Not just for the pros: the KKBR also provides home improvers and DIYers with a high-quality tool that ensures they can achieve superior cleaning results.

Rolls with paper backing and semi-open aluminium oxide coating. Particularly suitable for paints and varnishes Half-open coating for non-aggressive grinding Good for wood finishing Quality reference:    Grain Material suitability:   Wood    Machine suitability This product is sold in long rolls: the abrasive can then be cut to length for use in manual grinding. Material suitability This high-quality RHODIUS abrasive paper has been specially designed for processing aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Users will also achieve very good results with the KFPR when working on wood, paint and filler. Structure and manufacture The backing type used here is an A/C-weight paper. The abrasive paper is coated with aluminium oxide. The grain is semi-open coated. A long lifetime is ensured by the synthetic resin bonding. Quality The KFPR gives users a tool that easily meets the requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS rolls from the premium TOP line are recommended. Application The semi-open coat means that grinding work is particularly non-aggressive. Dimension This product is available in rolls with a length of 50 m and a width of 115 mm (shape RWA 0B). To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 320. Industries RHODIUS rolls can be cut to length as required, and are perfectly suited to tackling the many applications and challenges faced in the machine and metalwork shop, in plant construction, plumbing, interior fit-out and renovation, as well as installation work.

Felt flap drum, for use with satin finishing machines. High-quality wool felt Long lifetime through high-density fill Quality reference:    Grain Material suitability:   Steel   Satin finishing machine Machine suitability The FW felt flap drum is designed for use with a satin finishing machine. Material suitability The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FW on any of the materials listed here. Structure and manufacture High-quality wool felt is used for this product. This drum enjoys a very long lifetime thanks to its high-density coating. Quality The FW felt flap drum provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Always use this felt flap drum with the RHODIUS polishing paste that is perfectly matched to your working material. This ensures you achieve the best results. Dimension This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from several quality grades (flap thickness (D), felt hardness (H)): D3/H25, D3/H40, D5/H25, D5/H25. Industries This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.