Go to homepage
Shipping country:

VDE 2162 PH 1 VDE Screwdriver SLIM DRIVE Cross Slot PH 1

Variants
Variants table
Preview
Product name
Product number
Unit price
Purchase
VDE 2162 PH 1 VDE Screwdriver SLIM DRIVE Cross Slot PH 1GED2824442
€12.99
VDE 2162 PH 2 VDE Screwdriver SLIM DRIVE Cross Slot PH 2GED2824450
€15.21
We are happy to be there for you
+49 (0) 4101 780 28 80
Contact
Article nameVDE 2162 PH 1 VDE Screwdriver SLIM DRIVE Cross Slot PH 1
Product number:GED2824442
ManufacturerGEDORE
1000 V insulatedYes
Anti-magneticNo
Ball headNo
Blade length80 mm
Blade shapeRound
Cap rotatableNo
Colour codingYes
Contents (Qty of pieces)1
Corrosion ProtectedNo
Customs tariff number82054000
Drive hexagonNo
for screws of sizeM2 - M3
Handle availableYes
Handle design3-component grips VDE insulated up to 1000 V
Impact capNo
IsolatedYes
Low sparking designNo
MaterialMolybdenum-vanadium-steel
Net weight0,1 kg
Reachcompliant
Roll protectionNo
StandardEN 60900/IEC60900
Tip size cross recess (PH)1
Total length180 mm
Unit-testedYes
VDE certifiedYes
Versionwith hanging hole

GEDORE VDE 2162 PH 1 VDE Screwdriver SLIM DRIVE Cross Slot PH 1

Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Ultra-small blade diameter yet with full mechanical and electrical safety, No problems in reaching screws deeply embedded in screw shafts, Blade of galvanised molybdenum-vanadium steel


Double triangle symbol for individually tested VDE insulated tools
  • The double-triangle symbol indicates that the tool has been individually tested
  • Individually tested at 10,000 V AC (alternating voltage) based on EN 60900/IEC 60900
VDE insulated tools for use up to 1,000 V
  • Insulated up to 1,000 V in accordance with EN 60900/IEC 60900
  • Safe working under electrical voltage
  • Up to 1,000 V AC (alternating voltage)
  • Up to 1,500 V DC (direct voltage)
VDE tested and certified insulated tools
  • Testing carried out by the VDE Testing Institute
  • Tested by the VDE Testing Institute for compliance with the requirements relevant to the certification mark
  • Tools meet the requirements of the German equipment safety law
Tools with GS tested safety certification
  • GS = safety certified
  • Tool complies with the German Product Safety Act (ProdSG), as verified by an approved testing and certification body

What should I consider when using VDE insulated tools?

⚠️ Inspect VDE tools before every use! VDE insulated tools should always be checked for visible damage to the insulation before use. Cracks, cuts, excessive wear or a visible inner insulation layer indicate that the tool is no longer suitable for working on live electrical systems. If the insulation is damaged, the VDE tool must not be used for live working.

⚠️ VDE tools are no substitute for safe and professional working practices! Even high-quality insulated tools do not automatically make work on electrical installations safe. Appropriate technical qualifications, the correct working methods, suitable personal protective equipment (PPE) and compliance with all applicable safety regulations are equally important. Working on live electrical systems involves particular hazards and must only be carried out by appropriately qualified persons and under the prescribed conditions.

Information on product safety

Manufacturer:
GEDORE Werkzeugfabrik GmbH & Co. KG
Remscheider Str. 149, 42899 Remscheid, Germany
+49 2191 596 0
[email protected]