Angle drive 1/4" (set of 20 pcs.) incl. bits with quick-release chuck

cobit angle drive 1/4" (20-piece set) incl. bits with quick-change chuck

Angle drive with 1/4" bit holder for hard-to-reach areas. Suitable for use with all standard 4.8V - 18V cordless screwdrivers.

• Particularly robust design with QuickLock holder
• Holder can be swivelled 360° (45°, 90°,135°, 180°, 225°, 270°, 315°, 360°)
• Max. speed: 2000 rpm.
• Max. torque: 57 Nm
• Bit set in practical combination

Contents:

• 1x Angle gear with 1/4" (6.3 mm) hexagonal holder
• 1x Screwdriver-Bit 1/4" PH 1
• 2x Screwdriver-Bit 1/4" PH 2
• 1x Screwdriver-Bit 1/4" PH 3
• 1x Screwdriver-Bit 1/4" PZ 1
• 2x Screwdriver-Bit 1/4" PZ 2
• 1x Screwdriver-Bit 1/4" PZ 3
• 1x Screwdriver-Bit 1/4" for internal Torx® TX T10
• 1x Screwdriver-Bit 1/4" for internal Torx® TX T15
• 2x Screwdriver-Bit 1/4" for internal Torx® TX T20
• 2x Screwdriver-Bit 1/4" for internal Torx® TX T25
• 1x Screwdriver-Bit 1/4" for internal Torx® TX T30
• 1x Screwdriver-Bit 1/4" hexagon 3 mm
• 1x Screwdriver-Bit 1/4" hexagon 4 mm
• 1x Screwdriver-Bit 1/4" hexagon 5 mm
• 1x Screwdriver-Bit 1/4" hexagon 6 mm

TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

QuickLock

• in order to insert the bit, the guide sleeve must be unlocked manually
• after having inserted the bit, the sleeve is released (two-hand operation)
• now, the bit is locked safely
• for removing the bit, two hands are required, too