RHODIUS XT69 MULTI BOX 115 x 1.0 x 22.23 mm Extra-thin cutting disc

RHODIUS XT69 MULTI BOX 115x1.0x22.23 mm Extra-thin cutting disc

Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio.

• Reduced burr formation
• High cutting speed
• Fewer sparks
• Low edge cavitation

Machine suitability

The XT69 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines).

Material suitability

The XT69 has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc.

Structure and manufacture

The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts.

Quality

The XT69 MULTI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades.

Application

The XT69 offers impressive performance with an aggressive cut. High-precision processing of thin-walled material is easily achieved. The disc features minimal sparking and very smooth, vibration-free operation. The XT69 MULTI makes work easier. This high-quality RHODIUS tool is an especially good choice for cutting structural steel, painted sheet metal, galvanised structural parts, cable ducts, sections and beams.

Dimension

The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 105 mm to 230 mm.

Industries

This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.