RHODIUS FS1 FUSION 125 x 4.0 x 22.23 mm Grinding disc Grain 80

RHODIUS FS1 FUSION 125x4.0x22.23 mm Grinding disc Grain 80

The FS1 FUSION combines the fine surface finish of a flap disc with the durability of a grinding disc.

• Ideal for fillet weld grinding
• Economic alternative to flap discs
• Free choice of grit (40/60/80)

Machine suitability

The RHODIUS FS1 FUSION is a grinding disc (shape 27) for angle grinders in any performance class.

Material suitability

The RHODIUS FS1 FUSION has been specifically designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The FS1 FUSION grinding disc is an outstanding choice for fillet weld grinding.

Structure and manufacture

The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations.

Quality

The FS1 FUSION provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.

Application

The FS1 FUSION offers an impressive and aggressive level of stock removal performance. A choice of grits (40, 60 and 80) also allows users to modify the surface finish as required. The disc is very soft and can also be easily shaped – which offers a key advantage for circumferential grinding on fillet welds.

Dimension

The FS1 FUSION grinding disc has a disc width of 4.0 mm, and is available in the diameters of 115 mm and 125 mm.

Industries

This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork, and in tank, plant and pipeline construction.

Note

The RHODIUS grinding discs for stainless steel are iron- and sulphur-free. However, to avoid rusting you should never change from normal steel back to stainless steel with the same abrasive disc.