Screwdriving and fastening tools

GEDORE SCL 43 TX-80 Angle Screwdriver Set in Clip 8-piece TX T9-T40 Most common sizes in a kit, In robust metal clip

GEDORE 2163 TXB-05 3K screwdriver set 5 pieces TX pin T10-T30 Practical set composition in environmentally-friendly cardboard box, For recessed TX head screws with pilot, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel

GEDORE R38672006 2K T-handle screwdriver set hexagon 2.5-8 mm Two-way profile, 2-component-handle for a hands-friendly transfer of force, Blade of chrome-vanadium steel, Matt chrome-plated

GEDORE 2160 PHZ-06 3K screwdriver set 6 pieces PH+PZ 0-1-2 Practical set composition in environmentally-friendly cardboard box, For cross-head screws PH and PZ, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel

GEDORE H 42 CKEL-09 Angle Screwdriver Set 9-piece Color -piece Colour coding smakes it easy to choose the correct key, Ball head enables screwing in places that are difficult to access, Key easily removable, Abrasion-resistant powder-coated

GEDORE R38002012 Screwdriver set PH+PZ+LS 2K 12 -piece Blades of high-grade chrome-molybdenum steel, chrome-plated, Driven tips phosphated, corrosion-protected and low-wear, Moulded handles form a firm unit with the blades, 2-component-handle for a hands-friendly transfer of force, 5-edge handle heads stop them rolling off when put down, Elongated holes in the handle for hanging up

GEDORE SK 2154 PH-06 3K screwdriver set with striking cap 6 -piece Practical set composition in environmentally-friendly cardboard box, For tight-fitting slotted and Phillips screws PH, Hexagon blade with additional hexagon bolster, 3-component Power-Grip³ handle with impact cap, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Blade of galvanised molybdenum-vanadium steel

GEDORE 126008 Belt pipe wrench 8" (220 mm) Very gentle to surfaces, particularly suitable for chrome-plated fittings and polished surfaces, Light metal body, blue lacquered, With high-strength nylon strap

GEDORE DT 2142-06 Angle Screwdriver Set 6 -piece Most common sizes in a kit, For in-hex screws, With 2 hexagons in the same spanner width, Long blade with ball end, Chrome-vanadium steel 61CrSiV5, chromated

GEDORE H 42 DKEL-88 Angle Screwdriver Set XL 8-piece 2-10mm Most common sizes in a kit, 2 ball heads and extra short angle side for optimum working in confined spaces, Better accessibility and low overall height allow screwing without problems where normal offset screwdrivers fail, Rapid progress in work since the two ball ends allow protrusions to be gone round, Reduces the risk of injury to the fingers when working on flat surfaces, Chrome-vanadium steel 59CrV4, galvanized

GEDORE 43 TX-09 Angle screwdriver set, 9-piece TX T7-T40 Most common sizes in a kit, In blue PVC wallet, Chrome-vanadium steel 50CrV4, burnished

GEDORE 2142 TX-007 Screwdriver set 7-piece TX T-handle screwdriver for out-of-the-ordinary screw-tightening where considerable force is needed, Popular sizes for recessed TX screws T10 T15 T20 T25 T27 T30 T40, Effort-saving work thanks to ergonomic 2-component T-handles with hanging hole, Chrome-vanadium steel, blade chrome-plated, tip burnished

GEDORE VDE 2162-2172 PZ-06 VDE Screwdriver Set SLIM DRIVE 6-teilig Practical set composition in environmentally-friendly cardboard box, For slotted and cross-head screws PZ, Ultra-small blade diameter yet with full mechanical and electrical safety, No problems in reaching screws deeply embedded in screw shafts, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel .vde-info {margin-top: 30px;} .vde-info-row {display: flex; align-items: flex-start; gap: 5mm; margin-bottom: 20px;} .vde-info-icon {display: block; width: 75px; height: 75px; flex: 0 0 75px; object-fit: contain;} .vde-info-list {margin: 0; padding-left: 20px;} The double-triangle symbol indicates that the tool has been individually tested Individually tested at 10,000 V AC (alternating voltage) based on EN 60900/IEC 60900 Insulated up to 1,000 V in accordance with EN 60900/IEC 60900 Safe working under electrical voltage Up to 1,000 V AC (alternating voltage) Up to 1,500 V DC (direct voltage) Testing carried out by the VDE Testing Institute Tested by the VDE Testing Institute for compliance with the requirements relevant to the certification mark Tools meet the requirements of the German equipment safety law GS = safety certified Tool complies with the German Product Safety Act (ProdSG), as verified by an approved testing and certification body What should I consider when using VDE insulated tools? ⚠️ Inspect VDE tools before every use! VDE insulated tools should always be checked for visible damage to the insulation before use. Cracks, cuts, excessive wear or a visible inner insulation layer indicate that the tool is no longer suitable for working on live electrical systems. If the insulation is damaged, the VDE tool must not be used for live working. ⚠️ VDE tools are no substitute for safe and professional working practices! Even high-quality insulated tools do not automatically make work on electrical installations safe. Appropriate technical qualifications, the correct working methods, suitable personal protective equipment (PPE) and compliance with all applicable safety regulations are equally important. Working on live electrical systems involves particular hazards and must only be carried out by appropriately qualified persons and under the prescribed conditions.

GEDORE VDE 2162-2172 PM-06 VDE Screwdriver Set SLIM DRIVE 6-teilig Practical set composition in environmentally-friendly cardboard box, For slotted, cross-head PH and plus-minus screws, Ultra-small blade diameter yet with full mechanical and electrical safety, No problems in reaching screws deeply embedded in screw shafts, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel .vde-info {margin-top: 30px;} .vde-info-row {display: flex; align-items: flex-start; gap: 5mm; margin-bottom: 20px;} .vde-info-icon {display: block; width: 75px; height: 75px; flex: 0 0 75px; object-fit: contain;} .vde-info-list {margin: 0; padding-left: 20px;} The double-triangle symbol indicates that the tool has been individually tested Individually tested at 10,000 V AC (alternating voltage) based on EN 60900/IEC 60900 Insulated up to 1,000 V in accordance with EN 60900/IEC 60900 Safe working under electrical voltage Up to 1,000 V AC (alternating voltage) Up to 1,500 V DC (direct voltage) Testing carried out by the VDE Testing Institute Tested by the VDE Testing Institute for compliance with the requirements relevant to the certification mark Tools meet the requirements of the German equipment safety law GS = safety certified Tool complies with the German Product Safety Act (ProdSG), as verified by an approved testing and certification body What should I consider when using VDE insulated tools? ⚠️ Inspect VDE tools before every use! VDE insulated tools should always be checked for visible damage to the insulation before use. Cracks, cuts, excessive wear or a visible inner insulation layer indicate that the tool is no longer suitable for working on live electrical systems. If the insulation is damaged, the VDE tool must not be used for live working. ⚠️ VDE tools are no substitute for safe and professional working practices! Even high-quality insulated tools do not automatically make work on electrical installations safe. Appropriate technical qualifications, the correct working methods, suitable personal protective equipment (PPE) and compliance with all applicable safety regulations are equally important. Working on live electrical systems involves particular hazards and must only be carried out by appropriately qualified persons and under the prescribed conditions.

GEDORE KL-4007-500 Universal key extension 380 mm For easy extension of open-end spanners, combination spanners, offset combination spanners, and angled pin spanners. Required, for example, when loosening stuck screw connections in places which are difficult to access.

GEDORE 2142 T-008 Hex screwdriver set 8 -piece T-handle screwdriver for out-of-the-ordinary screw-tightening where considerable force is needed, Popular sizes for in-hex screws 2 2.5 3 4 5 6 8 10, Effort-saving work thanks to ergonomic 2-component T-handles with hanging hole, Chrome-vanadium steel, blade chrome-plated, tip burnished

GEDORE DT 2142-008 Angle Screwdriver Set 8 -piece For in-hex screws, With two hexagons, same size each end, Long blade with ball end, 2K T-handle with suspension hole, Vanadium steel 61CrSiV5, chromated

GEDORE H 43 KTX-07 Angle Screwdriver Set in Holder 7-piece TX T10-T40 In blue plastic holder (LPDE), With ball end, Chrome-vanadium steel 50CrV4, burnished

GEDORE DT 2143 KTX-007 Angle Screwdriver Set 7 -piece Popular sizes for recessed TX screws T10 T15 T20 T25 T27 T30 T40, With ball end, working angle approx. 25°, Chrome-vanadium steel, blades chrome-plated, tip phosphated, Chrome-vanadium steel, blade chrome-plated, tips phosphated