Injector puller sets

GEDORE KL-0187-101 Injector repair set for gasoline direct injection For damage-free assembly of combustion chamber sealing rings (Teflon sealing rings), and O-rings (fuel side) on direct injection petrol injectors. Before reinstalling a used injector, replace the sealing rings as specified by the manufacturer. The new sealing rings are simply pushed on the injector via the assembly cone with the aid of the calibration tool. The combustion chamber sealing ring is additionally narrowed (calibrated) in 2-steps at the sealing seat. A new combustion chamber gasket that has not been narrowed during installation is very likely to be damaged when the injector is reinstalled! Components KL-0187-1011 Calibration tool - GED3249360 KL-0187-1012 Assembly cone - GED3128768 KL-0187-1013 A Assembly cone - GED3407748

GEDORE KL-0369-420 Injector puller without impact puller Included in tool set KL-0186-1285 A.

GEDORE KL-0680-80 EA Injector puller Ford EcoBlue 2.0 For quick and professional extraction of stuck injectors directly on the vehicle, without dismantling the cylinder head. Components KL-0680-800 Supporting sleeve with bearing - GED3254372 KL-1383-1112 Collar nut, M16x1.5 - GED2223007 KL-0680-8002 A Pull spindle M17x0.75 x 200mm - GED3406210 KL-0680-8011 A Nozzle extractor - GED3406229 KL-0680-8090-1 A Foam Insert - GED3407012

GEDORE KL-0186-903 Injector puller set, supplement to pneumatic injector puller For quick and professional extraction of stuck injectors, in conjunction with the KL-0186-80 K pneumatically Injector extractor (Accesorie). Required, for example, when replacing the injectors or removing the valve cover. Suitable for many other injectors thanks to the KL-0186-9x expansion kits. Components KL-0186-1711 A Pull Spindle Adapter, M18 - 3400468 KL-0186-9000 A Head Plate with Cylinder screwn - GED3283852 KL-0186-9001 A Upgrade Kit, M12x1, 45° - GED3283925

GEDORE KL-0187-100 E Injector puller set for gasoline direct injection For quick and professional extraction of injectors on direct-injection petrol engines. Required, for example, when replacing the injectors and when dismantling the valve cover. The different extractors allow safe operation on the respective injector. With 0.8 kg impact extractor, for controlled but powerful extraction. Components KL-0187-1001 Puller for Slide Hammer - GED3278751 KL-0187-1002 Puller for Slide Hammer - GED3278778 KL-0187-1003 Puller for Slide Hammer - GED3278743 KL-0187-1004 Puller for Slide Hammer - GED3278735 KL-0187-1005 Puller for Slide Hammer - GED3278727 KL-0049-1205 Plastic Sleeve - 2378663 KL-0049-101 A Slide Hammer Puller (Base Tool) - GED3423638 KL-0187-1090 Foam Insert - GED3283763

GEDORE KL-0186-14 KB Injector puller set, universal The injector puller kit enables fast and powerful pulling of severely stuck injectors directly on the vehicle without having to remove the cylinder head. Depending on the injector, the special 2-part pull spindles with pull adapter can be universally combined in terms of length and connection diameter. Due to additional supplements, the injector extractor can be also used for further diesel injectors, e.g. with PSA 2.7, 3.0 Hdi (DT17, DT20); Fiat Ducato + Iveco 2.3, 2.4, 3.0 JTD; Mercedes CDI (OM651); VW, Audi, Seat, Skoda 1.6 TDI (CAYA, CAYB, CAYC, CAYD, CAYE, CLNA); Renault + Nissan + Opel 2.2, 2.5, 3.0 dci (G9T, G9U, ZD3) and Toyota 2.2 (2AD-FHV, 2AD-FTV) and many more. Components KL-0186-121 A Extraction bridge without spindle - GED3294935 KL-0186-1231-11 Support Bolt, 110mm - 3293750 KL-0186-1235-3 Grub screw, M6 x 45 - GED2411334 KL-0186-1235-2 Grub screw, M6 x 25 - GED2411326 KL-0583-1005 B Adaptor with nut, M17x1 / M27x1 - 3420094 KL-0583-1032 A Pull spindle adaptor, M14x1.5 - 3400425 KL-0186-1401 Pull Spindle, 115mm - 3400379 KL-0186-1402 Pull Spindle, 170mm - 3400409 KL-0186-1215 Shoulder Nut, M16x1.5 - GED2411059 KL-0369-4505 A Special Bit Insert Size, (waf) 10mm - GED2434237 KL-0369-461 A Special Socket, Size (waf) 29mm - GED2147777 KL-0186-1251 Set of Spacer Nuts, 5mm - GED2411342 KL-0186-1252 Set of Spacer Nuts, 10mm - GED2411369 KL-0186-1253 Set of Spacer Nuts, 15mm - GED2411385 KL-0126-221 Magnetic Lifter, Valve Collet, flexible - GED1752952 KL-4990-2001 Plastic Storage Box, 53x107x18mm - GED2802074 KL-0186-1492 B Foam Insert - 3420108 KL-4990-9474 Plastic Storage Case (empty) - GED3273660