VDE 2170 3 VDE Screwdriver Flat 3 mm

GEDORE VDE 2170 3 VDE Screwdriver Flat 3 mm

Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade, Tip as per DIN ISO 2380-1 Form A, 3-component Power-Grip³ handle with suspension hole, Ergonomic handle shape for accurate, non-tiring work, Positive connection of handle and blade for optimum power transmission, Type of drive marked at the end of the handle, Blade of galvanised molybdenum-vanadium steel

• The double-triangle symbol indicates that the tool has been individually tested
• Individually tested at 10,000 V AC (alternating voltage) based on EN 60900/IEC 60900

• Insulated up to 1,000 V in accordance with EN 60900/IEC 60900
• Safe working under electrical voltage
• Up to 1,000 V AC (alternating voltage)
• Up to 1,500 V DC (direct voltage)

• Testing carried out by the VDE Testing Institute
• Tested by the VDE Testing Institute for compliance with the requirements relevant to the certification mark
• Tools meet the requirements of the German equipment safety law

• GS = safety certified
• Tool complies with the German Product Safety Act (ProdSG), as verified by an approved testing and certification body

What should I consider when using VDE insulated tools?

⚠️ Inspect VDE tools before every use! VDE insulated tools should always be checked for visible damage to the insulation before use. Cracks, cuts, excessive wear or a visible inner insulation layer indicate that the tool is no longer suitable for working on live electrical systems. If the insulation is damaged, the VDE tool must not be used for live working.

⚠️ VDE tools are no substitute for safe and professional working practices! Even high-quality insulated tools do not automatically make work on electrical installations safe. Appropriate technical qualifications, the correct working methods, suitable personal protective equipment (PPE) and compliance with all applicable safety regulations are equally important. Working on live electrical systems involves particular hazards and must only be carried out by appropriately qualified persons and under the prescribed conditions.