RHODIUS XTK35 CROSS 115 x 1.9 x 22.23 mm Extra-thin cutting disc

RHODIUS XTK35 CROSS 115x1.9x22.23 mm Extra-thin cutting disc

Enables cutting and grinding in just one step – with a disc thickness of 1.9 mm.

• Extra-thin cutting and grinding with a single disc
• No disc change
• Safe through three full-face fabric layers

Machine suitability

For freehand use, the XTK35 CROSS cutting disc is suitable for angle grinders in any performance class.

Material suitability

The XTK35 CROSS has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc.

Structure and manufacture

This combination disc contains high-quality corundum (aluminium oxide) plus 3 full-coverage glass cloth layers. For this disc, the minimum side load as defined by EN 12413 and oSa is 290 N with grinding disc approval. The expiry date (three years) is embossed in the disc hole ring. Sophisticated in-process controls applied during manufacturing (Made in Germany) ensure a consistently high level of quality. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a depressed shape with grinding disc approval (shape 27).

Quality

The XTK35 CROSS gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.

Application

The disc is approved for both cutting and grinding work. The XTK35 CROSS offers impressive performance, with a very aggressive cut even in solid material. A key characteristic of this disc is its extremely low level of vibration. The disc also ensures a fine surface finish. All of which makes work easier and is especially cost-effective. The XTK35 CROSS offers an ideal price/performance ratio. This high-quality RHODIUS tool is especially suitable for cutting and grinding work on structural steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections and panels.

Dimension

This combination disc is approved for grinding work, and is available in a disc width of 1.9 mm, and in the diameters of 115 mm and 125 mm.

Industries

The disc is the perfect tool for handling the many jobs and challenges facing building fitters, as well as in container construction, structural steel engineering, plumbing and installation work.

Note

The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.